Comparison of Presurgical Dental Models Manufactured with Two Different Three-Dimensional Printing Techniques

الملخص EN

Three-dimensional printing is a rapidly developing area of technology and manufacturing in the field of oral surgery.

The aim of this study was comparison of presurgical models made by two different types of three-dimensional (3D) printing technology.

Digital reference models were printed 10 times using fused deposition modelling (FDM) and digital light processing (DLP) techniques.

All 3D printed models were scanned using a technical scanner.

The trueness, linear measurements, and printing time were evaluated.

The diagnostic models were compared with the reference models using linear and mean deviation for trueness measurements with computer software.

Paired t-tests were performed to compare the two types of 3D printing technology.

A P value < 0.05 was considered statistically significant.

For FDM printing, all average distances between the reference points were smaller than the corresponding distances measured on the reference model.

For the DLP models, the average distances in the three measurements were smaller than the original.

Only one average distance measurement was greater.

The mean deviation for trueness was 0.1775 mm for the FDM group and 0.0861 mm for the DLP group.

Mean printing time for a single model was 517.6 minutes in FDM technology and 285.3 minutes in DLP.

This study confirms that presurgical models manufactured with FDM and DLP technologies are usable in oral surgery.

Our findings will facilitate clinical decision-making regarding the best 3D printing technology to use when planning a surgical procedure.