Effect of Ta Additions on the Microstructure, Damping, and Shape Memory Behaviour of Prealloyed Cu-Al-Ni Shape Memory Alloys
المؤلفون المشاركون
Saud, Safaa N.
Hamzah, E.
Bakhsheshi-Rad, H. R.
Abubakar, T.
المصدر
العدد
المجلد 2017، العدد 2017 (31 ديسمبر/كانون الأول 2017)، ص ص. 1-13، 13ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2017-01-11
دولة النشر
مصر
عدد الصفحات
13
التخصصات الرئيسية
تكنولوجيا المعلومات وعلم الحاسوب
الملخص EN
The influence of Ta additions on the microstructure and properties of Cu-Al-Ni shape memory alloys was investigated in this paper.
The addition of Ta significantly affects the green and porosity densities; the minimum percentage of porosity was observed with the modified prealloyed Cu-Al-Ni-2.0 wt.% Ta.
The phase transformation temperatures were shifted towards the highest values after Ta was added.
Based on the damping capacity results, the alloy of Cu-Al-Ni-3.0 wt.% Ta has very high internal friction with the maximum equivalent internal friction value twice as high as that of the prealloyed Cu-Al-Ni SMA.
Moreover, the prealloyed Cu-Al-Ni SMAs with the addition of 2.0 wt.% Ta exhibited the highest shape recovery ratio in the first cycle (i.e., 100% recovery), and when the number of cycles is increased, this ratio tends to decrease.
On the other hand, the modified alloys with 1.0 and 3.0 wt.% Ta implied a linear increment in the shape recovery ratio with increasing number of cycles.
Polarization tests in NaCl solution showed that the corrosion resistance of Cu-Al-Ni-Ta SMA improved with escalating Ta concentration as shown by lower corrosion current densities, higher corrosion potential, and formation of stable passive film.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Saud, Safaa N.& Hamzah, E.& Bakhsheshi-Rad, H. R.& Abubakar, T.. 2017. Effect of Ta Additions on the Microstructure, Damping, and Shape Memory Behaviour of Prealloyed Cu-Al-Ni Shape Memory Alloys. Scanning،Vol. 2017, no. 2017, pp.1-13.
https://search.emarefa.net/detail/BIM-1197813
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Saud, Safaa N.…[et al.]. Effect of Ta Additions on the Microstructure, Damping, and Shape Memory Behaviour of Prealloyed Cu-Al-Ni Shape Memory Alloys. Scanning No. 2017 (2017), pp.1-13.
https://search.emarefa.net/detail/BIM-1197813
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Saud, Safaa N.& Hamzah, E.& Bakhsheshi-Rad, H. R.& Abubakar, T.. Effect of Ta Additions on the Microstructure, Damping, and Shape Memory Behaviour of Prealloyed Cu-Al-Ni Shape Memory Alloys. Scanning. 2017. Vol. 2017, no. 2017, pp.1-13.
https://search.emarefa.net/detail/BIM-1197813
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1197813
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر