Numerical Evaluation on Dynamic Response of Existing Underlying Tunnel Induced by Blasting Excavation of a Subway Tunnel

الملخص EN

In Southwest China, most regions are mountainous, where traditional drill-and-blast method is adopted to excavate relatively harder rocks.

However, blasting would cause vibration to adjacent structures and might result in damage or even failure.

This paper considers a case where subway tunnel is overlying an existing railway tunnel, while the excavation requires blasting method.

Vibration and stress distribution are calculated via Dynamic Finite Element Method (DFEM) for both full-face excavation and CD method.

Result shows that vibration induced by CD method is only 28% of that caused by full-face blasting with same distance.

Peak vibration is located on the lining facing the blasting source, while peak tensile stress is on the other side of the contour due to the reflection of stress wave on strata boundary.

And peak value of tensile stress induced by full-face blasting is capable of causing lining failure; thus full-face blasting is not suggested within 40 m beyond the underlying tunnel axis.

However, CD method has shown much advantage, since blasting within 25 m is also considered safe to the underlying tunnel.

But when the blasting source is as near as 12 m within the underlying tunnel, the CD method is no longer safe.