Effect of Pre-Existing Symmetrical Cracks on Propagation Behaviors of a Blast-Induced Crack

الملخص EN

Defects such as voids, pores, and joints will transform into big scale cracks in the rock of tunnel surrounding under dynamic load like blasting and earthquake.

In this paper, three kinds of symmetrical cracks were chosen as an example, and experiments and numerical simulations were conducted to study the effect of symmetric cracks on a blast-induced crack.

The relationship of main crack propagation characteristic and distribution of symmetrical cracks was investigated.

Some circular specimens using two kinds of material, PMMA and sandstone, including a center hole charged with a detonator and pre-existing cracks were used in the experiments.

The test system consisted of an oscilloscope and an ultradynamic strain amplifier and crack propagation gauges (CPGs) were employed in monitoring propagation velocity.

AUTODYN code was applied in numerical simulation to investigate the propagation behavior of main crack between symmetrical cracks.

Linear equation of state and a modified major principal stress failure criterion was utilized to describe the status of rock material.

Based on experimental and numerical results, it can be concluded that (1) the pre-existing symmetrical cracks have arrest effect on main crack propagation, (2) compressive stress in y-direction plays very important roles in crack arrest, and (3) the spacing of parallel cracks has a great influence on crack propagation length and velocity.