Evaluation of mechanical properties and finite element modeling in friction stir welding of c12200 copper alloy to c36000 high-leaded brass pipe
المؤلفون المشاركون
Khalif, Ali A.
Husayn, Abbas N.
Akbar, Ahmad A.
المصدر
Engineering and Technology Journal
العدد
المجلد 38، العدد 8A (31 أغسطس/آب 2020)، ص ص. 1106-1116، 11ص.
الناشر
تاريخ النشر
2020-08-31
دولة النشر
العراق
عدد الصفحات
11
التخصصات الرئيسية
تكنولوجيا المعلومات وعلم الحاسوب
الموضوعات
الملخص EN
n systems transporting fluids like petrol, water, or any fluids.
Copper and brass pipes are used because of the capability to resist corrosion.
The copper alloys can be welded by several methods like arc, resistance, friction welding, and gas methods and they can be readily soldered and brazed.
In the present study, mechanical properties and finite element modeling evaluation for friction stir welding of two dissimilar pipes (C12200 copper alloy pipe with C36000 copper alloy pipe).
During this study six parameters were used where rotation speed of (775, 1000, 1300 and1525rpm), welding speed of 1.7 mm/min, axial force of 8.5KN, with a CW direction of rotation, and zero degree of tilt angle, using a threaded cone geometry of the tool.
The results showed that the best weld quality was in case when the speed of rotation was 1525 n systems transporting fluids like petrol, water, or any fluids.
Copper and brass pipes are used because of the capability to resist corrosion.
The copper alloys can be welded by several methods like arc, resistance, friction welding, and gas methods and they can be readily soldered and brazed.
In the present study, mechanical properties and finite element modeling evaluation for friction stir welding of two dissimilar pipes (C12200 copper alloy pipe with C36000 copper alloy pipe).
During this study six parameters were used where rotation speed of (775, 1000, 1300 and1525rpm), welding speed of 1.7 mm/min, axial force of 8.5KN, with a CW direction of rotation, and zero degree of tilt angle, using a threaded cone geometry of the tool.
The results showed that the best weld quality was in case when the speed of rotation was 1525 rpm
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Akbar, Ahmad A.& Khalif, Ali A.& Husayn, Abbas N.. 2020. Evaluation of mechanical properties and finite element modeling in friction stir welding of c12200 copper alloy to c36000 high-leaded brass pipe. Engineering and Technology Journal،Vol. 38, no. 8A, pp.1106-1116.
https://search.emarefa.net/detail/BIM-1236375
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Husayn, Abbas N.…[et al.]. Evaluation of mechanical properties and finite element modeling in friction stir welding of c12200 copper alloy to c36000 high-leaded brass pipe. Engineering and Technology Journal Vol. 38, no. 8A (2020), pp.1106-1116.
https://search.emarefa.net/detail/BIM-1236375
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Akbar, Ahmad A.& Khalif, Ali A.& Husayn, Abbas N.. Evaluation of mechanical properties and finite element modeling in friction stir welding of c12200 copper alloy to c36000 high-leaded brass pipe. Engineering and Technology Journal. 2020. Vol. 38, no. 8A, pp.1106-1116.
https://search.emarefa.net/detail/BIM-1236375
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 116
رقم السجل
BIM-1236375
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر