Production optimization for natural flow and ESP well : a case study on well NS-5 mishrif formation-nasriya oil field

الملخص EN

As the reservoir conditions are in continuous changing during its life, well production rate and its performance will change and it needs to re-model according to the current situations and to keep the production rate as high as possible.

Well productivity is affected by changing in reservoir pressure, water cut, tubing size and wellhead pressure.

For electrical submersible pump (ESP), it will also affected by number of stages and operating frequency.

In general, the production rate increases when reservoir pressure increases and/or water cut decreases.

Also the flow rate increase when tubing size increases and/or wellhead pressure decreases.

For ESP well, production rate increases when number of stages is increased and/or pump frequency is increased.

In this study, a nodal analysis software was used to design one well with natural flow and other with ESP.

Reservoir, fluid and well information are taken from actual data of Mishrif formation-Nasriya oil field/ NS-5 well.

Well design steps and data required in the model will be displayed and the optimization sensitivity keys will be applied on the model to determine the effect of each individual parameter or when it combined with another one.