The use of binding jetting additive manufacturing in creating corrugated web beams and truss beams for lightweight steel framing systems
مقدم أطروحة جامعية
مشرف أطروحة جامعية
الجامعة
جامعة الإسراء
الكلية
كلية الهندسة
القسم الأكاديمي
قسم الهندسة المدنية
دولة الجامعة
الأردن
الدرجة العلمية
ماجستير
تاريخ الدرجة العلمية
2020
الملخص الإنجليزي
This research is dedicated to explore the benefits of the additive manufacturing in the field of structural engineering.
For that purpose, two structural systems were chosen for investigation.
The corrugated web beam, and the truss beam.
Various 3D models were created of these two systems, finite element analysis was conducted on these models, and then these prototypes were manufactured.
Four prototypes of one normal web beam and three corrugated web beams were created using traditional methods of welding, three prototypes of similar corrugated web beams were created using additive manufacturing, and two prototypes of truss beams were created using the additive technology.
Experimental tests were conducted on these prototypes.
Both the finite element analysis and the experimental tests showed that the higher the level of corrugation, the higher the value of load carrying capacity.
However, in the traditionally manufactured beams, the effect of the corrugation is reduced significantly due to the effect of the heat of welding.
This problem does not exist in the additively manufactured prototypes that showed close performances to the finite element analysis models.
This is because no welding existed.
The finite element analysis of the truss beam models showed very close performances of models TR1 and TR2 and a higher load carrying capacity of model TR3.
However, prototype TR2 had a higher load capacity than its finite element analysis model, while prototype TR1 had a less load capacity than its finite element analysis model due to the higher level of load redistribution of model TR2.
التخصصات الرئيسية
الموضوعات
عدد الصفحات
71
قائمة المحتويات
Table of contents.
Abstract.
Chapter One : Introduction.
Chapter Two : Literature review.
Chapter Three : Methodology.
Chapter Four : Finite element analysis.
Chapter Five : Experimental testing program.
Chapter Six : Results and discussion.
Chapter Seven : Conclusion.
References.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Abu Ridin, Ghayth Atif. (2020). The use of binding jetting additive manufacturing in creating corrugated web beams and truss beams for lightweight steel framing systems. (Master's theses Theses and Dissertations Master). Isra University, Jordan
https://search.emarefa.net/detail/BIM-1269028
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Abu Ridin, Ghayth Atif. The use of binding jetting additive manufacturing in creating corrugated web beams and truss beams for lightweight steel framing systems. (Master's theses Theses and Dissertations Master). Isra University. (2020).
https://search.emarefa.net/detail/BIM-1269028
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Abu Ridin, Ghayth Atif. (2020). The use of binding jetting additive manufacturing in creating corrugated web beams and truss beams for lightweight steel framing systems. (Master's theses Theses and Dissertations Master). Isra University, Jordan
https://search.emarefa.net/detail/BIM-1269028
لغة النص
الإنجليزية
نوع البيانات
رسائل جامعية
رقم السجل
BIM-1269028
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر