Numerical analysis for reinforced concrete beams with circular openings in flexural and shear zones strengthened by steel plates

العناوين الأخرى

التحليل الرقمي للجسور الخرسانية المسلحة التي تحتوي على فتحات دائرية في منطقتي العزم و القص مقواه بصفائح صلبة

عدد الاستشهادات بقاعدة ارسيف : 
1

المؤلفون المشاركون

al-Dhabyani, Ahmad Ali
al-Ansi, Abd al-Wahhab

المصدر

Journal of Science and Technology

العدد

المجلد 23، العدد 2 (31 ديسمبر/كانون الأول 2018)، ص ص. 31-48، 18ص.

الناشر

جامعة العلوم و التكنولوجيا كلية الهندسة و الحاسبات

تاريخ النشر

2018-12-31

دولة النشر

اليمن

عدد الصفحات

18

التخصصات الرئيسية

العلوم الهندسية والتكنولوجية (متداخلة التخصصات)

الملخص EN

In the modern building construction, openings in beams are necessary to accommodate several service pipes and ducts.

Due to these openings, high stress concentration occurs at its edges.

Local cracks also appear around the openings as a result of the reduction in the beam stiffness, the load carrying capacity and the shear capacity.

There are many studies which were conducted to develop and test different strengthening methods for the beams opining to increase the ultimate load capacity of the beams.

However, from a practical point of view, it is better to have one strengthening method having the same specifications to be used in both; shear and flexural zones for circular opining beams in buildings.

In spite of the prior studies, no study has addressed this issue; therefore, there is a need to study such a case.

In this paper, an analytical study was conducted to investigate the behavior of the reinforced concrete (RC) beams with circular openings in flexural and shear zones strengthened by steel plates.

A 3D FE modeling (ABAQUS 6.12) software was used to simulate five different specimens of RC beams.

The study results showed that when the openings were strengthened by steel plates, the ultimate load carrying capacity increased, but the deflection was decreased when compared to the openings without strengthening.

In addition, the model reliability was verified via good agreements between the experimental and numerical results.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

al-Dhabyani, Ahmad Ali& al-Ansi, Abd al-Wahhab. 2018. Numerical analysis for reinforced concrete beams with circular openings in flexural and shear zones strengthened by steel plates. Journal of Science and Technology،Vol. 23, no. 2, pp.31-48.
https://search.emarefa.net/detail/BIM-1314532

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

al-Dhabyani, Ahmad Ali& al-Ansi, Abd al-Wahhab. Numerical analysis for reinforced concrete beams with circular openings in flexural and shear zones strengthened by steel plates. Journal of Science and Technology Vol. 23, no. 2 (2018), pp.31-48.
https://search.emarefa.net/detail/BIM-1314532

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

al-Dhabyani, Ahmad Ali& al-Ansi, Abd al-Wahhab. Numerical analysis for reinforced concrete beams with circular openings in flexural and shear zones strengthened by steel plates. Journal of Science and Technology. 2018. Vol. 23, no. 2, pp.31-48.
https://search.emarefa.net/detail/BIM-1314532

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes bibliographical references : p. 47-48

رقم السجل

BIM-1314532