Evaluation of thin film composite forward osmosis membranes : effect of polymer type
المؤلفون المشاركون
Abudi, Zaydun N.
Kazim, Ayah M.
al-Furaiji, Mustafa H.
المصدر
Journal of Engineering and Sustainable Development
العدد
المجلد 25، العدد 6 (30 يونيو/حزيران 2021)، ص ص. 65-73، 9ص.
الناشر
الجامعة المستنصرية كلية الهندسة
تاريخ النشر
2021-06-30
دولة النشر
العراق
عدد الصفحات
9
التخصصات الرئيسية
الموضوعات
الملخص EN
In the forward osmosis (FO) processes, the semipermeable membranes are used.
These membranes are prepared from several types of polymers.
In this research, the characterizations of each polymer were studied to conversance the effect of polymer type on the efficiency of the forward osmosis process.
The prepared membrane's roughness was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM) to compare the formation of the TFC polyamide selective layer on each polymer type.
Also, SEM images showed the distribution of pores on the prepared membrane.
Contact angle (CA) measurements explained the hydrophilic and hydrophobic properties of membrane types.
Finally, Energy dispersion spectrometry (EDS) was tested to determine the type, amount, and distribution of atoms in the prepared membranes.
All of these characterizations proved that the Polysulfone (PSU) polymer was the best choice in the FO process.
It can be proved that by test results, the PSU membrane gave the optimal water flux and salt processes, the semipermeable membranes are used.
These membranes are prepared from several types of polymers.
In this research, the characterizations of each polymer were studied to conversance the effect of polymer type on the efficiency of the forward osmosis process.
The prepared membrane's roughness was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM) to compare the formation of the TFC polyamide selective layer on each polymer type.
Also, SEM images showed the distribution of pores on the prepared membrane.
Contact angle (CA) measurements explained the hydrophilic and hydrophobic properties of membrane types.
Finally, Energy dispersion spectrometry (EDS) was tested to determine the type, amount, and distribution of atoms in the prepared membranes.
All of these characterizations proved that the Polysulfone (PSU) polymer was the best choice in the FO process.
It can be proved that by test results, the PSU membrane gave the optimal water flux and salt rejection.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Kazim, Ayah M.& al-Furaiji, Mustafa H.& Abudi, Zaydun N.. 2021. Evaluation of thin film composite forward osmosis membranes : effect of polymer type. Journal of Engineering and Sustainable Development،Vol. 25, no. 6, pp.65-73.
https://search.emarefa.net/detail/BIM-1368945
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Kazim, Ayah M.…[et al.]. Evaluation of thin film composite forward osmosis membranes : effect of polymer type. Journal of Engineering and Sustainable Development Vol. 25, no. 6 (2021), pp.65-73.
https://search.emarefa.net/detail/BIM-1368945
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Kazim, Ayah M.& al-Furaiji, Mustafa H.& Abudi, Zaydun N.. Evaluation of thin film composite forward osmosis membranes : effect of polymer type. Journal of Engineering and Sustainable Development. 2021. Vol. 25, no. 6, pp.65-73.
https://search.emarefa.net/detail/BIM-1368945
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
-
رقم السجل
BIM-1368945
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر