Approximate solutions for bending of beams and buckling of columns made of functionally graded materials

العناوين الأخرى

حلول التقريبية لانحناء الجيزان و انبعاج الأعمدة المصنوعة من مواد متدرجة وظيفيا

مقدم أطروحة جامعية

al-Taani, Musab Hasan Ahmad

مشرف أطروحة جامعية

Numayr, Karim Suwaylim

الجامعة

جامعة الإسراء

الكلية

كلية الهندسة

القسم الأكاديمي

إدارة المشاريع الهندسية

دولة الجامعة

الأردن

الدرجة العلمية

ماجستير

تاريخ الدرجة العلمية

2022

الملخص العربي

في هذا البحث تم تطوير حلول تقريبية لحل مشاكل الجيزان و الاعمدة للمواد المتدرجة وظيفياً.

يعتبر المواد المتدرجة وظيفيا في الاتجاه العرضي لكل من الجيزان و الأعمدة باستخدام وظائف مختلفة ؛ دالة الطاقة، الدالة الأسية، و الدالة السينية أيضًا، تُستخدم قيم طاقة مختلفة للنظر في تركيزات مختلفة للمواد في الاتجاه العرض للجيزان و الأعمدة.

تم تطوير الحلول التقريبية لأول مرة لحزم المواد المتدرجة و ظيفيا باستخدام تقنيات تكرارية تعتمد على حساب متوسط معامل المرونة في شد الجيزان ومناطق الانضغاط لتحديد النواتج الهيكلية المختلفة مثل مخططات الانحراف والانحدار و القص و العزم.

تم تتم مقارنة المخرجات بنظرية انحناء أويلر الكلاسيكية للتحقق من صحة الطريقة التقريبية المعتمدة المستخدمة في الحل.

بالإضافة إلى مشاكل انحناء الجيزان، تم أيضا تطوير حلول تقريبية المشاكل انبعاج الاعمدة للمولد المتدرجة وظيفيا.

الطرق المعتمدة في الحل هي حاصل رايلي و حاصل تيموشينكو و طريقة رايلي ريتز تتم مقارنة هذه الطرق بحلول أويلر التحليلي الكلاسيكي.

تم اعتماد برنامج ماتلاب لحل كلتا المشكلتين لأنه بسيط ودقيق.

سلطت النتائج الرئيسية لهذه الدراسة الضوء على أهمية الحلول التقريبية في حل مشاكل الانحناء و انبعاج المتدرجة وظيفيا.

بالنسبة لمشاكل الانحناء، نتج عن الطريقة التقريبية المقترحة خطأ طفيف (0) عند مقارنتها بالحل التحليلي.

أما بالنسبة لمشاكل انبعاج، فقد أظهرت طريقة رايلي - ريتز أنها الأكثر دقة في حساب حمل الانبعاج الحرج مع خطأ أقل من 0.75% بينما أدت طريقة رايلي إلى أخطاء كبيرة (22).

في نهاية هذا العمل، تم تقديم بعض التوصيات للعمل البحثي المستقبلي على التدرج الوظيفي للهياكل.

الملخص الإنجليزي

In this research approximate solutions are developed to solve Functionally Graded Material (FGM) beam and column problems.

FGM is considered in the transversal direction of both beams and columns using different functions; power function, exponential function, and sigmoidal function.

Also, different power values are used to consider different material concentrations in the transversal direction of beams and columns.

Approximate solutions are first developed for FGM beams using iterative techniques based on averaging the elasticity modulus in beam’s tension and compression zones to determine different structural outputs like deflection, slope, shear and moment diagrams.

Then outputs are compared to classical Euler bending theory to validate the adopted approximate method used in the solution.

In addition to beam bending problems, approximate solutions for FGM column buckling problems are also developed.

The methods adopted in solution are Rayleigh’s Quotient, Timoshenko’s Quotient, and Rayleigh-Ritz method.

These methods are compared to the analytical classical Euler buckling solution.

MATLAB program is adopted to solve both problems since it is simple and precise.

The main results of this study shed the light on the importance of approximate solutions in solving FGM bending and buckling problems.

For bending problems, the approximate method suggested resulted in trivial error (~0%) when compared to analytical solution.

As for buckling problems, Rayleigh-Ritz method showed to be the most accurate one in calculating critical buckling load with error less than 0.75%, while Rayleigh method led to significant errors (~22%).

At the end of this work, some recommendations were presented for future research work on FG structural members.

التخصصات الرئيسية

الهندسة المدنية

عدد الصفحات

72

قائمة المحتويات

Table of contents.

Abstract.

Abstract in Arabic.

Chapter One : Introduction.

Chapter Two : Literature review.

Chapter Three : Research methodology.

Chapter Four : Results and discussion.

Chapter Five : Conclusions and recommendations.

References.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

al-Taani, Musab Hasan Ahmad. (2022). Approximate solutions for bending of beams and buckling of columns made of functionally graded materials. (Master's theses Theses and Dissertations Master). Isra University, Jordan
https://search.emarefa.net/detail/BIM-1429117

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

al-Taani, Musab Hasan Ahmad. Approximate solutions for bending of beams and buckling of columns made of functionally graded materials. (Master's theses Theses and Dissertations Master). Isra University. (2022).
https://search.emarefa.net/detail/BIM-1429117

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

al-Taani, Musab Hasan Ahmad. (2022). Approximate solutions for bending of beams and buckling of columns made of functionally graded materials. (Master's theses Theses and Dissertations Master). Isra University, Jordan
https://search.emarefa.net/detail/BIM-1429117

لغة النص

الإنجليزية

نوع البيانات

رسائل جامعية

رقم السجل

BIM-1429117