Modified soaking procedure based experimental investigation of cyclic gas recovery : effect of gas-phase miscibility

الملخص EN

The current and latest technology to produce unconventional oil reservoirs is the cyclic gas injection method.

Over the last decade, extensive experiments have been conducted to produce tight reservoirs, and a wide variety of parameters have been considered.

However, the influence of key factors such as gas-phase miscibility and miscibility mode on oil recovery remains unclear.

Additionally, previous studies have focused mostly on conventional procedures that fail to satisfactorily represent depleted oil field conditions.

These assumptions may be the justification for the disappointing outcomes of some pilot tests, in spite of the outstanding demonstration of competence of the lab scale.

This study attempts to explore the sensitivity of CO₂ phase miscibility and CO₂ miscibility mode in enhancing the bypassed oil recovery.

Prior to the cyclic gas process, oil is bypassed in tight sandstone cores using the immiscible soaking step.

The findings indicate that increasing CO₂ injection pressure may not be the only factor contributing to extracting residual oil; the CO₂ phase properties may also play a significant role in producing remaining oil.

The use of supercritical CO₂ resulted in the highest bypassed oil recovery rate of up to 30.40%.

However, the compressed liquid CO₂ phase recovered slightly more initial oil, particularly at pressures less than or equal to the minimum miscibility pressure (MMP).

Increasing the CO₂ soaking time plays a major role in extracting the bypassed oil.

However, 50% of the oil can be extracted within the first cycle.

Therefore, a long soaking period is not recommended in the subsequent cycles.