Minimum reinforcement required for concrete beams with hybrid bars and hybrid fibers-numerical investigation
العناوين الأخرى
نسب الحديد الدنيا المطلوبة للكمرات الخرسانية المسلحة بألياف الفايبر الهجين وأسياخ التسليح الهجين
المؤلفون المشاركون
Uways, Ahmad al-Sayyid
Makhluf, Muhammad Husayn
Abd al-Karim, Ahmad Hasan
Khalil, Jamal Ismail
المصدر
Journal of Al-Azhar University Engineering Sector
العدد
المجلد 19، العدد 72 (31 يوليو/تموز 2024)، ص ص. 858-877، 20ص.
الناشر
تاريخ النشر
2024-07-31
دولة النشر
مصر
عدد الصفحات
20
التخصصات الرئيسية
الملخص AR
الهدف من هذا البحث هو إنشاء منحنيات وصياغة معادلات لتصميم العناصر الخرسانية ذات مواد البناء الحديثة واحدة من المتطلبات الأساسية في الامتثال لشروط التصميم هي التحقق من الحد الأدنى لنسبة التسليح لضمان وجود إنذارات قبل انهيار العناصر الخرسانية المسلحة والتخفيف من تكوين الشروخ الناتجة عن الانكماش.
في هذه الدراسة، يقوم الباحثون بدراسة التسليح الأدنى للكمرات المسلحة بأسياخ مهجنة بالإضافة إلى وجود ألياف الفايبر من خلال استخدام المحاكاة العددية.
تم نمذجة وتحليل خمسة عشر كمرة خرسانية مسلحة لفهم ومعرفة سلوك الانحناء للكمرات ذات نسبة تسليح منخفضة.
وتشمل المتغيرات المدروسة نسب التسليح التي تتراوح بين 0.0% و0.5%، بالإضافة إلى تغيير عمق الكمرات.
وتصنف نتائج التحليل العددي التي تم الحصول عليها في ضوء الترخيم الكلي للكمرات، عزوم التشرخ وعزوم الانحناء القصوى.
تستخدم طريقتين مختلفتين لإيجاد نسبة التسليح الدنيا: (أ) طريقة عزوم التشرخ و(ب) طريقة معامل الممطولية.
وتظهر التقييمات المقارنة بين الطريقتين أن استخدام الألياف الهجين يسمح بتقليل نسبة التسليح الأدنى على وجه الخصوص عند تطبيق طريقة معامل الممطولية، تنخفض نسبة التسليح الأدنى إلى 0.081% بدلا من 0.18% للكمرات المسلحة.
جدير بالذكر أن طريقة معامل الممطولية يظهر توافقا أفضل مع نتائج التحليل العددي مقارنة بطريقة عزوم التشرخ.
الملخص EN
The intent of this research is to establish a design procedure and formulate equations for a novel construction material.
adhering to design codes, one crucial requirement is to verify the minimum reinforcement area to ensure the ductile failure of RC members and mitigate crack formation resulting from shrinkage.
within this study, the authors explore the minimum reinforcement of beams with both hybrid bars and hybrid fibers through the utilization of numerical simulations.
to analyze the flexural behavior of low reinforcement ratio members, fifteen RC beams are modeled and subjected to four-point loading configurations.
the parameters under scrutiny encompass the hybrid reinforcement ratios ranging from 0.0% to 0.50%, as well as the beam depth.
the outcomes of the numerical analysis, obtained through the nonlinear finite element analysis (NLFEA) method, are presented in light of maximum deflection, and cracking and peak capacity.
two distinct approaches are employed to explore the minimum reinforcement ratios: (a) the cracking moment approach and (b) the ductility index (DI) approach.
comparative evaluations between these approaches demonstrate that the incorporation of hybrid fibers allows for a reduction in the minimum reinforcement ratio.
specifically, when implementing the DI approach, the minimum reinforcement ratio decreases to 0.081% instead of 0.18% for RC beams.
notably, the DI approach exhibits superior agreement with the NLFEA results in comparison to the cracking moment approach.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Uways, Ahmad al-Sayyid& Makhluf, Muhammad Husayn& Abd al-Karim, Ahmad Hasan& Khalil, Jamal Ismail. 2024. Minimum reinforcement required for concrete beams with hybrid bars and hybrid fibers-numerical investigation. Journal of Al-Azhar University Engineering Sector،Vol. 19, no. 72, pp.858-877.
https://search.emarefa.net/detail/BIM-1596839
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Uways, Ahmad al-Sayyid…[et al.]. Minimum reinforcement required for concrete beams with hybrid bars and hybrid fibers-numerical investigation. Journal of Al-Azhar University Engineering Sector Vol. 19, no. 72 (Jul. 2024), pp.858-877.
https://search.emarefa.net/detail/BIM-1596839
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Uways, Ahmad al-Sayyid& Makhluf, Muhammad Husayn& Abd al-Karim, Ahmad Hasan& Khalil, Jamal Ismail. Minimum reinforcement required for concrete beams with hybrid bars and hybrid fibers-numerical investigation. Journal of Al-Azhar University Engineering Sector. 2024. Vol. 19, no. 72, pp.858-877.
https://search.emarefa.net/detail/BIM-1596839
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references: p. 875-877
رقم السجل
BIM-1596839
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر