Influence of heat treatment conditions on microstructure of ti-6al-7nb alloy as used surgical implant materials
المؤلفون المشاركون
Ujayl, Sami Abu al-Nun
al-Zubaydi, Thair L.
Sawadi, Abd al-Salam Khashshan
المصدر
Engineering and Technology Journal
العدد
المجلد 25، العدد 03 (30 مايو/أيار 2007)، ص ص. 431-442، 12ص.
الناشر
تاريخ النشر
2007-05-30
دولة النشر
العراق
عدد الصفحات
12
التخصصات الرئيسية
الموضوعات
الملخص AR
تتضمن الدراسة تأثير التشكيل الميكانيكي و المعاملات الحرارية على التراكيب المجهرية لسبيكة (Ti-6Al-7Nb) المستخدمة في الزوارع الجراحية.
لوحظ بأن خواص سبيكة التيتانيوم ثنائية الطور (α/β) تعتمد بشدة التراكيب المجهرية هذه.
تعامل هذه السبائك بطريقة المعاملة المحلولية و التعتيق كطريقة فعالة لتقوية سبائك التيتانيوم ثنائية الطور(α / β).
يتم درفلة هذه السبيكة على الساخن في منطقة (ألفا - بيتا) و تجري لها معاملة محلولية فوق و تحت درجة حرارة تحول بيتا.
استخدمت المعاملة المحلولية بثلاث درجات حرارية هي (850مْ, 930مْ, 950مْ) و بزمن قدره ساعة واحدة لجميع تلك المعاملات.
تبرد هذه السبيكة بعد المعاملات أعلاه بثلاث أوساط تبريد هي التبريد السريع (تبريد بالماء), و المعادلة (تبريد بالهواء) و التلدين (تبريد داخل الفرن).
يتم بعدها إجراء عملية التعتيق عند 550مْ لمدة أربعة ساعات للنماذج التي تم تبريدها (بالماء و الهواء).
لوحظ حصول تغيرات في البنية المجهرية بفعل هذه المعاملات باستخدام المجهر الضوئي, طيف الامتصاص الذري و تحليل الأطوار باستخدام حيود الأشعة (XRD).
أظهرت نتائج الفحص الدقيق للسبيكة (كما استملت) على حبيبات ألفا / حبيبات بيتا للنماذج التي عوملت حراريا بأنها تعتمد على نوع تلك المعاملة و وسط التبريد.
تشير نتائج البنية المجهرية لنماذج السبيكة المعاملة حراريا عند 950مْ و تبريد بالهواء إلى وجود تركيب مزدوج دقيق (α / β) الذي يمتاز بأفضل الخواص التطبيقية في مجال الزوارع الجراحية.
الملخص EN
The study involves mechanical deformation and heat treatment effect on the microstructure of the Ti-6 Al-7 Nb alloy which is used as surgical implanted materials.
The observed properties of (alpha-beta) Ti-based alloy are strongly dependent on their microstructures.
These alloys are heat treated by solution treatment and aging (STA) as an effective strengthening method for (alphabet) titanium alloys.
Ti-6 Al-7 Nb alloy is hot rolled in the (alpha-beta) field and subjected to solution treatment above and below its beta transformation temperature.
The solution treatments are applied at three different temperatures (850oC, 930oC and 950oC) for one hour to these treatments.
The solution treatment specimens are water quenched (WQ), normalizing [air cooled (AC) and annealed, [furnace cooled (FC)] and subsequently aged the quenched and normalized specimens at 550oC for 4 hours.
Changes in the microstructure were observed from heat treatment action using optical microscopy, Atomic Absorption Spectroscopy (AAS) and phase's analysis by X-ray diffraction (XRD).
The microstructure examination results for as received alloy indicate alpha grains within a b- transformed matrix.
The results also indicate that the grain size and percent of a / b for the heat treated specimens depend on heat treatment type and cooling media.
The microstructure of specimens heat treated at 950oC with air cooled shows fine duplex (a / b) structures which have excellent properties for surgical implanted field applications.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ujayl, Sami Abu al-Nun& al-Zubaydi, Thair L.& Sawadi, Abd al-Salam Khashshan. 2007. Influence of heat treatment conditions on microstructure of ti-6al-7nb alloy as used surgical implant materials. Engineering and Technology Journal،Vol. 25, no. 03, pp.431-442.
https://search.emarefa.net/detail/BIM-186202
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ujayl, Sami Abu al-Nun…[et al.]. Influence of heat treatment conditions on microstructure of ti-6al-7nb alloy as used surgical implant materials. Engineering and Technology Journal Vol. 25, no. 03 (2007), pp.431-442.
https://search.emarefa.net/detail/BIM-186202
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ujayl, Sami Abu al-Nun& al-Zubaydi, Thair L.& Sawadi, Abd al-Salam Khashshan. Influence of heat treatment conditions on microstructure of ti-6al-7nb alloy as used surgical implant materials. Engineering and Technology Journal. 2007. Vol. 25, no. 03, pp.431-442.
https://search.emarefa.net/detail/BIM-186202
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 441-442
رقم السجل
BIM-186202
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر