The analysis and feasibility of using heat pipe cooling in drilling applications
العناوين الأخرى
تحليل و قياس امكان الاستفادة لتبريد انبوب الحراري عند التثقيب
المؤلفون المشاركون
Kainifar, A.
Faridnia, F.
Javadi, M.
المصدر
Arab Journal of Basic and Applied Sciences
العدد
المجلد 4، العدد 0 (31 أغسطس/آب 2007)، ص ص. 157-165، 9ص.
الناشر
تاريخ النشر
2007-08-31
دولة النشر
البحرين
عدد الصفحات
9
التخصصات الرئيسية
الملخص AR
في المطالعة العددية التي جرت للتحقيق في قياس الإمكان عند الاستفادة لتبريد أنبوب الحراري في التثقيب.
المثقاب و الأنبوب الحراري تعتبر اسطوانتان ذا مركز واحد تصنع بالنماذج.
و لكي تمنع ببساطه، تنتقل و تهدي الحرارة.
في هذا النموذج، الاصطكاك على المثقاب الدوار يعتبر شار حراري و ثابت في صنع المشابه.
و كذلك تعين و تقاس أثر المؤشرات الهندسية مثل قطر الأنبوب الحراري و أعماقه و الشار الحراري الوارد.
و لتصديق النتائج العددية، تقاس هذه النتائج مع النتائج الحاصلة من المختبرات و نرى التطابق الجيد فيهما و مع النظر لهذه النتائج يمكن تحفيظ ميدان درجة الحرارة عند الاستفادة من الأنبوب الحراري للتثقيب.
و كذلك تحصل على مقادير جيده لقطر الأنبوب و طول الناحية الوروديه.
الملخص EN
A numerical study was performed to investigate the feasibility of using heat pipe cooling in drilling applications.
The drill and heat pipe were modeled as concentric cylinders and for simplification only conduction heat transfer was considered.
In this model the friction that is imposed to the rotating drill was simulated as constant heat flux.
Also the effect of geometrical parameters such as heat pipe diameter, heat pipe depth, and input heat flux was analyzed.
To validate the numerical results, they were compared with the experimental results which show a good compatibility.
According to these results, using heat pipe in drilling applications can significantly reduce the field temperature.
Also the optimized value of the diameter and the length of heat input zone were obtained.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Kainifar, A.& Faridnia, F.& Javadi, M.. 2007. The analysis and feasibility of using heat pipe cooling in drilling applications. Arab Journal of Basic and Applied Sciences،Vol. 4, no. 0, pp.157-165.
https://search.emarefa.net/detail/BIM-247158
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Kainifar, A.…[et al.]. The analysis and feasibility of using heat pipe cooling in drilling applications. Arab Journal of Basic and Applied Sciences Vol. 4 (Aug. 2007), pp.157-165.
https://search.emarefa.net/detail/BIM-247158
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Kainifar, A.& Faridnia, F.& Javadi, M.. The analysis and feasibility of using heat pipe cooling in drilling applications. Arab Journal of Basic and Applied Sciences. 2007. Vol. 4, no. 0, pp.157-165.
https://search.emarefa.net/detail/BIM-247158
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 164
رقم السجل
BIM-247158
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر