Tensile and buckling analysis of the polymer composite beam reinforced by natural jute fiber
العناوين الأخرى
تحليل الشد والإنبعاج لعمود قريب بوليمري مقوى بألياف الجوت الطبيعية
المؤلفون المشاركون
al-Jabburi, Qahtan Adnan Hamad
al-Saidi, Muhammad Kashkul Ulwan
Tariq, Muhammad Ali
المصدر
Engineering and Technology Journal
العدد
المجلد 29، العدد 1 (31 يناير/كانون الثاني 2011)، ص ص. 129-140، 12ص.
الناشر
تاريخ النشر
2011-01-31
دولة النشر
العراق
عدد الصفحات
12
التخصصات الرئيسية
الملخص AR
في هذا البحث تم تحضير مادة متراكبة ذات أساس بوليمري بطريقة الصب اليدوي من البولي استرغير المشبع كمادة أساس مقواة بألأياف الجوت الطبيعية و بكسور حجمية مختلفة هي (3 %، 4 %، 5 %، 6 %).
تم استخدام الجانب العملي و تقنية العناصر المحددة لتحليل الشد و الانبعاج لعمود مركب مقوى بالأياف الجوت الطبيعية و عند كسور حجمية مختلفة.
النتائج العملية لمعامل المرونة كانت ضمن مدى النتائج النظرية.
لقد وجد أن الحمل الحرج يزداد بزيادة الكسر الحجمي بحيث (P cr = 610N) عند (V f = 3 %) و (P cr = 830N) عند (V f = 6 %) للنتائج العملية.
بينما كانت (P cr = 619N) عند (V f = 3 %) و (P cr =877N) عند (V f = 6 %) نتائج العناصر المحددة.
الملخص EN
This research focuses on the preparation of polymer matrix composite material by (hand lay–UP) method, where the material was prepared from unsaturated polyester resin (up) as a matrix reinforced by natural jute fiber with different volume fractions (3%, 4%, 5%, 6%).The experimental work and finite element techniques were used to analysis the tensile and the buckling analysis of the composite beam reinforced by natural jute fiber at different volume fraction.
The results of experimental work of the modulus of elasticity were in the range of the theoretical results.
The critical load increased with increase the fiber volume fraction that (P cr =610N) at (V f = 3%) and (P cr =830N) at (V f =6 %) for the experimental results.
While (P cr =619N) at (V f = 3%) and (P cr =877N) at (Vf =6 %) for the finite element results.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Saidi, Muhammad Kashkul Ulwan& al-Jabburi, Qahtan Adnan Hamad& Tariq, Muhammad Ali. 2011. Tensile and buckling analysis of the polymer composite beam reinforced by natural jute fiber. Engineering and Technology Journal،Vol. 29, no. 1, pp.129-140.
https://search.emarefa.net/detail/BIM-259490
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Saidi, Muhammad Kashkul Ulwan…[et al.]. Tensile and buckling analysis of the polymer composite beam reinforced by natural jute fiber. Engineering and Technology Journal Vol. 29, no. 1 (2011), pp.129-140.
https://search.emarefa.net/detail/BIM-259490
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Saidi, Muhammad Kashkul Ulwan& al-Jabburi, Qahtan Adnan Hamad& Tariq, Muhammad Ali. Tensile and buckling analysis of the polymer composite beam reinforced by natural jute fiber. Engineering and Technology Journal. 2011. Vol. 29, no. 1, pp.129-140.
https://search.emarefa.net/detail/BIM-259490
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 134-135
رقم السجل
BIM-259490
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر