Disc laser system construction and characterization

العناوين الأخرى

تركيب و توصيف منظومة الليزر القرصي

المؤلفون المشاركون

Zahir, Muhammad Karim
Hajim, Khalil Ibrahim
Abd al-Amir, Yusuf Harbi

المصدر

Iraqi Journal of Laser

العدد

المجلد 9، العدد 1B (30 يونيو/حزيران 2010)، ص ص. 7-10، 4ص.

الناشر

جامعة بغداد معهد الليزر للدراسات العليا

تاريخ النشر

2010-06-30

دولة النشر

العراق

عدد الصفحات

4

التخصصات الرئيسية

تكنولوجيا المعلومات وعلم الحاسوب

الملخص AR

في هذا البحث تم تصميم و تنفيذ منظومة ليزر قرصي نوع Nd : YVO4.

لقد صمم الليزر القرصي بحيث يكون صغير الحجم و يضخ بواسطة ليزر الدايود ذي طول موجي 808 نانو متر.

و كذلك تم اختبار تأثير التيار الداخل إلى المنظومة و التردد النبضي على الطاقة الخارجة في حالة العمل بالنمط النبضي، تأثير التيار الداخل للمنظومة و القدرة المضخخة في حالة العمل بالنمط المستمر.

فقد وجد أن الطاقة الخارجة تزداد خطيا مع التيار الداخل و تقل مع زيادة التردد النبضي كما ازداد حد العتبة للتيار الداخل يزداد بزيادة التردد النبضي.

أقصى طاقة خارجة من المنظومة هي 0.98 مايكرو جول عند التردد 1.3 كيلو هرتز واقل قيمة لحد العتبة للتيار الداخل اللازم لتشغيل المنظومة هو 0.49 أمبير عند نفس التردد.

أما بالنسبة إلى العمل بالطور المستمر فأقصى قدرة خارجة من المنظومة هي 22 ملي واط.

الملخص EN

In this work a Nd : YVO4 thin disc laser setup is designed and fabricated.

The disk laser system is designed to be compact.

The laser crystal was pumped by a 808 nm diode laser.

The effect of input current and pulse frequency on the output energy at pulse operation mode, and the effect of the input current on the output power at CW mode operation are tested.

At the pulsed mode, the output energy increased linearly with the input current and decreased with pulse frequency.

The threshold current increased with increasing pulse frequency increasing.

The maximum output energy from the thin disc laser was 0.98 μJ at 1.3 kHz frequency, with 0.49A.

A minimum threshold current for CW mode of operation.

The maximum output power from the disc laser was 22 m W.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

Abd al-Amir, Yusuf Harbi& Zahir, Muhammad Karim& Hajim, Khalil Ibrahim. 2010. Disc laser system construction and characterization. Iraqi Journal of Laser،Vol. 9, no. 1B, pp.7-10.
https://search.emarefa.net/detail/BIM-279600

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

Abd al-Amir, Yusuf Harbi…[et al.]. Disc laser system construction and characterization. Iraqi Journal of Laser Vol. 9, no. 1B (Jun. 2010), pp.7-10.
https://search.emarefa.net/detail/BIM-279600

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

Abd al-Amir, Yusuf Harbi& Zahir, Muhammad Karim& Hajim, Khalil Ibrahim. Disc laser system construction and characterization. Iraqi Journal of Laser. 2010. Vol. 9, no. 1B, pp.7-10.
https://search.emarefa.net/detail/BIM-279600

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes bibliographical references : p. 10

رقم السجل

BIM-279600