Theoretical study for plate with holes under distributed load using finite element method
المؤلفون المشاركون
Ewaish, Muhammad
Ismail, Hazim
Hammud, Sadiq Muhsin
المصدر
العدد
المجلد 2، العدد 3 (31 ديسمبر/كانون الأول 2006)، ص ص. 56-67، 12ص.
الناشر
جامعة ذي قار قسم البحث و التطوير
تاريخ النشر
2006-12-31
دولة النشر
العراق
عدد الصفحات
12
التخصصات الرئيسية
الملخص AR
يقدم هذا البحث دراسة نظرية حول سلوك و تصرف نماذج من نوع (Plate With Holes) باستخدام طريقة العناصر المحددة (Finite Element Method).
النماذج المستخدمة في هذه الدراسة كانت معرضة إلى اجهادات شد باتجاه الطول و تحتوي على ثقب يقع في مركز الصفيحة.
تم تغيير قطر الثقب لدراسة تأثير هذا التغيير على تمركز الإجهادات (Stress Concentrations) أيضا تم دراسة تأثير عدد الثقوب على تمركز الإجهادات عن طريق أخذ صفائح تحتوي على عدد من الثقوب مرة بثقب واحد و أخرى بثقبين ثم بثلاث ثقوب و أخيرا صفيحة بأربع ثقوب مع تغيير أقطار هذه الثقوب لمعرفة السلوك تحت هذه التغييرات.
و أخيرا تم دراسة تأثير المسافة بين مراكز الثقوب على تمركز الإجهادات عن طريق أخذ صفيحة تحتوي على أربع ثقوب و على مسافات متساوية، ثم تغيير هذه المسافات مع المحافظة على تساويها بين الثقوب.
النتائج تم الحصول عليها عن طريق استخدام برنامج يسمى ANSYS و هو برنامج متخصص للحل بواسطة العناصر المحددة.
الملخص EN
The study represents a numerical investigation onto the behavior of a plate with hole, or number of holes by finite element method.
The investigated specimens are subjected to a direct tension stresses acting parallel to the axis of the plate.
Initially the plate contain one hole at the center of plate, the diameter of this hole was changed to study the effect of this variation on stress concentration.
Also, the effect of number of holes onto the stress concentration were studied by taken a plate with one hole, two holes, three holes and four holes distributed along the plate axis.
In each study all the holes had the same diameter.
Finally the effect of the distance between the centers of holes were studied by taken a plate with four holes at the same distance each other, then these distances varied uniformly.
All results were obtained using a program called ANSYS.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Hammud, Sadiq Muhsin& Ewaish, Muhammad& Ismail, Hazim. 2006. Theoretical study for plate with holes under distributed load using finite element method. University of Thi-Qar Journal،Vol. 2, no. 3, pp.56-67.
https://search.emarefa.net/detail/BIM-282122
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Hammud, Sadiq Muhsin…[et al.]. Theoretical study for plate with holes under distributed load using finite element method. University of Thi-Qar Journal Vol. 2, no. 3 (Dec. 2006), pp.56-67.
https://search.emarefa.net/detail/BIM-282122
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Hammud, Sadiq Muhsin& Ewaish, Muhammad& Ismail, Hazim. Theoretical study for plate with holes under distributed load using finite element method. University of Thi-Qar Journal. 2006. Vol. 2, no. 3, pp.56-67.
https://search.emarefa.net/detail/BIM-282122
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 67
رقم السجل
BIM-282122
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر