![](/images/graphics-bg.png)
A study mechanical properties of epoxy resin cured at constant curing time and temperature with different hardeners
العناوين الأخرى
دراسة الخواص الميكانيكية لراتنج الايبوكسي المقسى بثبوت الزمن و درجة الحرارة بأنواع مختلفة من المصلدات
المؤلفون المشاركون
Tuma, Manal A.
Aziz, Maryam E.
Abd al-Razzaq, Adnan A.
Salih, Najat Jumah
المصدر
Engineering and Technology Journal
العدد
المجلد 29، العدد 9 (31 ديسمبر/كانون الأول 2011)، ص ص. 1804-1818، 15ص.
الناشر
تاريخ النشر
2011-12-31
دولة النشر
العراق
عدد الصفحات
15
التخصصات الرئيسية
الموضوعات
الملخص AR
في هذه الدراسة تم تقسية راتنج الأيبوكسي ذو الوزن الجزيئي الواطئ تحت درجة حرارى ثابتة باستخدام مصلدات أمينية اليفاتية و أروماتية كلا على حدة و هذه المصلدات هي (1) Triethylenetetramine (TETA), (2) diamino diphenylmethane (DDM) .
تم تحضير نماذج مختلفة تحتوي على نسب مختلفة من راتنج / مصلد ( تحت الاتحاد العنصري / الاتحاد العنصري / فوق الاتحاد العنصري).
تم تعيين الخواص الميكانيكية التالية للنماذج المحضرة : قوة الصدمة / قوة الشد / الصلادة / قوة الانضغاط / و قوة الثني.
بالنسبة لنظام (DGEBA / TETA) تم إجراء الفحوصات لأربع نسب مختلفة من المصلد / راتنج (10, 13, 15, 20) جزء من المئة و لنظام (DGEBA / DDM) تم إجراء الفحوصات لأربع نسب مختلفة من المصلد / راتنج وهي (24, 27, 30, 34) جزء من المئة.
اظهرت النتائج أن المكون المؤلف (15 جزء من المئة) من نظام (DGEBA / TETA) و (30 جزء من المئة) من نظام (DGEBA / DDM) أعطى أفضل خواص ميكانيكية.
إضافة لما تقدم تبين أن نظام (DGEBA / DDM) أظهر خواص كيميائية أفضل من (DGEBA / TETA).
الملخص EN
In this study, a low molecular weight epoxy resin diglycidyl ether of biphenyl A (DGEBA) is cured isothermally with an aliphatic and aromatic amine hardeners separately.
(1) Triethylenetetramine (TETA), (2) diamino diphenylmethane (DDM).
The samples were prepared for different hardener / resin ratios, (under stoichiometry, stoichiometry and above stoichiometry).
The mechanical Properties impact strength, tensile strength, hardness, flexural strength, compression strength and bending strength of an epoxy system has been investigated in this work.
For DGEBA / TETA system the tests were done on four hardener / resin ratios (10, 13, 15 and 20) phr and for DGEBA / DDM system the hardener / resin ratios were four also ; (24, 27, 30 and 34) phr.
The results showed that the above stoichiometry ratio formulation (15 phr for DGEBA / TETA system and 30 phr for DGEBA /DDM system) gave the best mechanical properties, while the DGEBA / DDM system showed better mechanical properties than the DGEBA / TETA system.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Salih, Najat Jumah& Abd al-Razzaq, Adnan A.& Tuma, Manal A.& Aziz, Maryam E.. 2011. A study mechanical properties of epoxy resin cured at constant curing time and temperature with different hardeners. Engineering and Technology Journal،Vol. 29, no. 9, pp.1804-1818.
https://search.emarefa.net/detail/BIM-290010
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Salih, Najat Jumah…[et al.]. A study mechanical properties of epoxy resin cured at constant curing time and temperature with different hardeners. Engineering and Technology Journal Vol. 29, no. 9 (2011), pp.1804-1818.
https://search.emarefa.net/detail/BIM-290010
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Salih, Najat Jumah& Abd al-Razzaq, Adnan A.& Tuma, Manal A.& Aziz, Maryam E.. A study mechanical properties of epoxy resin cured at constant curing time and temperature with different hardeners. Engineering and Technology Journal. 2011. Vol. 29, no. 9, pp.1804-1818.
https://search.emarefa.net/detail/BIM-290010
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendices : p. 1815-1818
رقم السجل
BIM-290010
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)