Theoretical and experimental investigation of transient temperature distribution in friction stir welding of AA 7020-T53
المؤلفون المشاركون
Tolephih, Munir Hamid
Abd al-Sattar, Muhammad
Jwij, Muhsin Jabr
المصدر
العدد
المجلد 18، العدد 6 (30 يونيو/حزيران 2012)، ص ص. 693-709، 17ص.
الناشر
تاريخ النشر
2012-06-30
دولة النشر
العراق
عدد الصفحات
17
التخصصات الرئيسية
الملخص AR
موديل رياضي بطريقة العناصر المحددة استخدم لتمثيل التوزيع الحراري العابر و فهم الظواهر الفيزياوية التي تحدث أثناء عملية الغرز (دخول) و حركة أداة اللحام في عملية اللحام بطريقة اللخلط الاحتكاك لصفيحة من سبيكة الألمنيوم (7020-T53) بسمك 5 ملم عقد (سرعة دورانية 1400rpm، سرعة خطية 40mm / min).
النتائج النظرية باستخدام (12.0 ANSYS) قورنت مع النتائج العملية متضمنة قياس الحمل العمودي عمليا لعدة سرع دورانية (710rpm،900rpm، 1120rpm، 1400rpm).
في هذا العمل تم استخدام مزدوجات حرارية وضعت في مواقع قريبة من رأس أداة اللحام (pin) و تحت (shoulder) لغرض دراسة عملية دخول و كيفية توزيع الحرارة على جانبي و تحت أداة اللحام و لثلاث مناطق من الصفيحة (منطقة الغرز، وسط، نهاية اللحام (خروج أداة اللحام)).
بالاعتماد على النتائج العملية المسجلة للتوزيع الحراري العابر عقد مواقع مختلفة للمزدوجات الحرارية على جانبي أداة اللحام خلال عملية اللحام الخلط الاحتكاك وجد أن درجة الحرارة في منطقة (629.2 0K advance) هي أعلى من منطقة (retreate 605 0K)على طول خط اللحام كما أن الحرارة عند سطح العينة تحت (shoulder 645 0K) هي أعلى من أسفل العينة (635.79 0K)، أقصى حرارة سجلت كانت 70 % من درجة الانصهار للسبيكة الامنيوم.
نتائج الموديل الرياضي كانت متوافقة مع النتائج العملية.
الملخص EN
Finite element modeling of transient temperature distribution is used to understand physical phenomena occurring during the dwell (penetration) phase and moving of welding tool in friction stir welding (FSW) of 5mm plate made of 7020-T53 aluminum alloy at 1400rpm and 40mm / min. Thermocouples are used in locations near to the pin and under shoulder surface to study the welding tool penetration in the work piece in advance and retreate sides along welding line in three positions (penetrate (start welding) , mid, pullout (end welding)). Numerical results of ANSYS 12.0 package are compared to experimental data including axial load measurements at different tool rotational speeds (710rpm.900rpm.1120rpm and 1400rpm) Based on the experimental records of transient temperature at several specific locations of thermocouples during the friction stir welding process the temperatures are higher on the advancing side (629.2 K) than the retreating side (605 K) along welding line and temperature in the top of work piece under tool shoulder is higher(645 K) than bottom (635.79K).
The results of the simulation are in good agreement with that of experimental results.
The peak temperature obtained was 70 % of the melting point of parent metal.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Jwij, Muhsin Jabr& Tolephih, Munir Hamid& Abd al-Sattar, Muhammad. 2012. Theoretical and experimental investigation of transient temperature distribution in friction stir welding of AA 7020-T53. Journal of Engineering،Vol. 18, no. 6, pp.693-709.
https://search.emarefa.net/detail/BIM-304042
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Jwij, Muhsin Jabr…[et al.]. Theoretical and experimental investigation of transient temperature distribution in friction stir welding of AA 7020-T53. Journal of Engineering Vol. 18, no. 6 (Jun. 2012), pp.693-709.
https://search.emarefa.net/detail/BIM-304042
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Jwij, Muhsin Jabr& Tolephih, Munir Hamid& Abd al-Sattar, Muhammad. Theoretical and experimental investigation of transient temperature distribution in friction stir welding of AA 7020-T53. Journal of Engineering. 2012. Vol. 18, no. 6, pp.693-709.
https://search.emarefa.net/detail/BIM-304042
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendices : p. 709
رقم السجل
BIM-304042
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر