Experimental and theoretical investigation of square deep drawing

مقدم أطروحة جامعية

Jabir, Adil Shabib

مشرف أطروحة جامعية

Yunus, Karim Muhsin

الجامعة

الجامعة التكنولوجية

الكلية

-

القسم الأكاديمي

قسم هندسة الإنتاج و المعادن

دولة الجامعة

العراق

الدرجة العلمية

ماجستير

تاريخ الدرجة العلمية

2010

الملخص الإنجليزي

Deep drawing operation such as (die and punch profile radius, blank size, blank shape, draw bead, material properties) on produced cup wall thickness, strain distribution across the wall of the drawn part, punch force and height of the drawn cup.

A problem that has more attention in this work is the elimination and reduction of the earing defect in the square deep drawing process.

-3D model of square cup (41.4mm by 41.4mm), and (0.7 mm) thickness from Low carbon steel (1008-AISI), has been developed.

Because of the symmetry in the specimen geometry, only one fourth portion of the model was needed to be analyzed using finite element method, a commercial available finite element program code (ANSYS11), is used to perform the numerical simulation of the deep drawing operation.

And the numerical results were compared with the experimental work In this work, three types of blank shape (circular, square, and octagonal), with different sizes, four types of punch profile radii of (3, 5, 6 and 7mm) and three types of die profile radii of (3, 5, 7mm) have been chosen to form a square cup The results show that, Excessive earing will appear in the square cup when square blank was used, due to excessive material in the corner and minimum material in the flat side, and when using octagonal blank which have an equivalent surface area to the square blank, the earing in the cup corner is reduced because of extraction of the excessive material from the corner of the blank.

The best results were obtained from the circular blank, according to useful drawing height and earing.

التخصصات الرئيسية

الرياضيات

• APA
• MLA
• AMA

لغة النص

الإنجليزية

نوع البيانات

رسائل جامعية

رقم السجل

BIM-305225