Optimization of process parameters for spring back phenomena in bending operation
مقدم أطروحة جامعية
مشرف أطروحة جامعية
Abd, Asil Hamad
Yunus, Karim Muhsin
الجامعة
الجامعة التكنولوجية
الكلية
-
القسم الأكاديمي
قسم هندسة الإنتاج و المعادن
دولة الجامعة
العراق
الدرجة العلمية
ماجستير
تاريخ الدرجة العلمية
2011
الملخص الإنجليزي
-Springback is very important factor to influence quality of sheet metal forming.
Accurate prediction and controlling of springback is essential for the design of tools for sheet metal forming, many parameters affect on this phenomenon, we used in this study rolling direction [0o , 45o , 90o ], punch speed [2, 20, 200] mm/min and dwell time [0.0333, 1, 5] min.
The main objective of the present work is to find the optimum parameters that reduce the springback by using the commercially [SPSS] program to analysis data and find the best parameters which given lowest springback.
A die was designed and constructed in different shape (V-die, V-air die, U-die).
A commercial Aluminum alloy [AL-1050] sheet (0.9 mm) thickness we found that the U-die has lower springback and the V-air die has higher springback and when increase punch speed increase the springback, when direction angle rolling is 90o Lower springback, and when increase the dwell time decrease the springback, and the value of parameters predicted from [SPSS] have lower springback this led to reduce the cost and obtain a goal dimension for the products.
Multiple regression models are proposed for each die to predict springback by using (SPSS) model.
Punch speed and direction angle rolling and dwell time are used as independent input variables (parameters), while springback as dependent output variable.
The multiple regression model using (SPSS) could predict the spring back with average percentage of Standard Error estimated for springback (SPSS ) it is 0.582%,0.439% and 0.298 % for V- die ,V- air die and Udie respectively, and 0.336%,0.206% and 0.174% for V- die ,V- air die and U- die respectively in springback ratio ( s K ).
التخصصات الرئيسية
الموضوعات
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Mansur, Khalidah Kazim. (2011). Optimization of process parameters for spring back phenomena in bending operation. (Master's theses Theses and Dissertations Master). University of Technology, Iraq
https://search.emarefa.net/detail/BIM-305326
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Mansur, Khalidah Kazim. Optimization of process parameters for spring back phenomena in bending operation. (Master's theses Theses and Dissertations Master). University of Technology. (2011).
https://search.emarefa.net/detail/BIM-305326
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Mansur, Khalidah Kazim. (2011). Optimization of process parameters for spring back phenomena in bending operation. (Master's theses Theses and Dissertations Master). University of Technology, Iraq
https://search.emarefa.net/detail/BIM-305326
لغة النص
الإنجليزية
نوع البيانات
رسائل جامعية
رقم السجل
BIM-305326
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر