![](/images/graphics-bg.png)
Study and development of new solar cells
مقدم أطروحة جامعية
مشرف أطروحة جامعية
Hulw, Hasan W.
al-Hasimi, Abbas F.
الجامعة
الجامعة التكنولوجية
الكلية
-
القسم الأكاديمي
قسم الهندسة الكهربائية
دولة الجامعة
العراق
الدرجة العلمية
دكتوراه
تاريخ الدرجة العلمية
2010
الملخص الإنجليزي
Photovoltaic are the promising renewable technology for the 21st century.
Three generations of solar cell technologies are established in the previous century.
This work involves an extensive analysis of the selection of optimum band-gap (Eg) of ternary III-V compounds for application in the third generation (3G) multi-junction solar cells.
Several (3 and 4 junctions) structures have been realized with different layer material compositions for simulating the performance of III-V multi-junction solar cells.
The highest efficiency can be achieved if two parameters are satisfied: Lattice matching and current matching of the different layers of the solar cell.
Those parameters are critically dependent on (Eg).
A special program is designed and implemented in Visual Basic language to select the band-gap of each composition through variation of its component’s concentrations which is an important tool to make the design process more efficient, otherwise it would be almost impossible to achieve the design.
A new five groups of ternary III-V materials are established to reach the optimum values of (Eg) that satisfy the lattice and current matching.
It is found that group (D) is the best, which has the band-gap division of (0.97bottom / 1.52middile / 2.07top) with structures) Ga0.64In0.36As / Ga0.27In0.73P / Al0.68In0.32As) and (GaAs0.70Sb0.30 / Ga0.27In0.73P Al0.68In0.32As) having the optimum lattice and current matching.
The Back Surface Field (BSF) is used in the (1G) and (2G) generation solar cells.
This technique increases the average minority carrier lifetime.
In this work new experimental conditions for increasing the average minority carrier lifetime are found.
This enhanced the solar cell efficiency.
Different annealing temperatures (620-940) ℃ and different annealing times (60-180) sec.
are used.
A thin layer of aluminum (Al) is passivity on the back surface of the crystalline silicon (c-Si) substrate.
The longest average minority carrier lifetime obtained is (5.455μs) using microwave photoconductive decay (μ-PCD) technique at annealing temperate of (700 ˚C) and annealing time of (150 sec) in order to decrease Surface Recombination Velocity (SRV).
التخصصات الرئيسية
الموضوعات
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Nasir, Qusayy Asim Hanna. (2010). Study and development of new solar cells. (Doctoral dissertations Theses and Dissertations Master). University of Technology, Iraq
https://search.emarefa.net/detail/BIM-305328
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Nasir, Qusayy Asim Hanna. Study and development of new solar cells. (Doctoral dissertations Theses and Dissertations Master). University of Technology. (2010).
https://search.emarefa.net/detail/BIM-305328
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Nasir, Qusayy Asim Hanna. (2010). Study and development of new solar cells. (Doctoral dissertations Theses and Dissertations Master). University of Technology, Iraq
https://search.emarefa.net/detail/BIM-305328
لغة النص
الإنجليزية
نوع البيانات
رسائل جامعية
رقم السجل
BIM-305328
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)