Effects of sintering temperature on the structure, microstructure and properties of 0.935 (bi0.5 na0.5)‎ tio3-0.065batio3 piezoelectric ceramics

المؤلفون المشاركون

Hobar, F.
Lidjici, H.
Rguiti, M.
Trelcat, J. F.
Courtois, C.
Leriche, A.

المصدر

Sciences et Technologie : Sciences Appliquées

العدد

المجلد 2010، العدد 32 (31 ديسمبر/كانون الأول 2010)، ص ص. 25-28، 4ص.

الناشر

جامعة الإخوة منتوري قسنطينة 1

تاريخ النشر

2010-12-31

دولة النشر

الجزائر

عدد الصفحات

4

التخصصات الرئيسية

الهندسة المدنية

الموضوعات

الملخص AR

درس تأثير درجة حرارة تلبيد الخزفيات الخالية من الرصاص (Bi0.5 Na0.5 )TiO3 -0.065BaTiO3 0.935 في المجال الحراري 1200˚C - 1150˚C.

طيف انعراج الأشعة السينية أثبت أن البنية البلورية هي بنية البروفكسيت مع تداخل الطور الرباعي و الطور ثلاثي الميل لجميع العينات.

لوحظ في درجة حرارة التلبيد 1150˚C و 1160˚C أن البنية المهجرية ذات حبيبات صغيرة و متجانسة، أما في المجال التلبيد الحراري 1200˚C - 1180˚C لوحظ نمو حبيبات مع ظهور حبيبات كبيرة الحجم.

في درجة حرارة الغرفة، قيم الإستقطابية الذاتية Pr هي 27, 31, 27 و 29 μC / cm2 بالنسبة للعينات الملبدة في 1180˚C, 1150˚C, 1160˚C و 1200˚C على التوالي.

العينة الملبدة في درجة حرارة 1180˚C تملك خصائص جيدة : ثابت عزل ذو قيمة 833 عند الاهتزاز 1KHz، عامل الكهروميكانيكي Kt ذو قيمة 0.52 و النسبة Kt / Kp ذات قيمة 2.08.

إذن يمكن استعمال هذه الخزفيات في تطبيقات محول الموجات الفوق صوتية.

الملخص EN

The influence of sintering temperature of 0.935(Bi0.5 Na0.5) TiO3 -0.065BaTiO3 lead-free ceramics was studied from 1150°C to 1200°C.

The X-ray diffraction patterns showed that all of the BNT6.5BT ceramics exhibited a single perovskite structure with the coexistence of the rhombohedral and tetragonal phase.

A fine and homogeneous grains were observed for samples sintered at 1150 and 1160°C and the increase of the sintering temperature up to 1180-1200°C induces significant grain growth with the appearance of coarse grains.

The values of remnant polarization Pr obtained at room temperature are 27, 31, 27 and 29 Μc / cm2 for specimens sintered at 1150, 1160, 1180 and 12000C respectively.

At room temperature, the sample sintered at 1180°C exhibited good performances : dielectric constant was 833 at 1 KHz, thick coupling factor kt was 0.52 and the kt / kp ratio was 2.08.

Therefore, the ceramics can be suitable for ultrasonic transducers in commercial applications

الملخص FRE

L’effet de la température de frittage des céramiques exempt de Plomb 0.935(Bi0.5 Na0.5 )TiO3 -0.065BaTiO3 a été étudié dans la gamme de température 1150°C - 1200°C.

La diffraction des rayons X montre que la structure est de type perovskite avec la co-exixtence de la phase rhombohédrique et tetragonale.

Des grains fines et homogènes ont été observé pour les échantillons frittés à1150 et 1160°C et une augmentation de la température de frittage à 1180-1200°C provoque une croissance significative des grains avec l’apparition des grosses grains.

Les valeurs de la polarisation rémanente Pr à la température ambiante sont 27, 31, 27 et 29 μC/cm2 pour les échantillons frittés à 1150, 1160, 1180 et 12000C respectivement.

A la température ambiante l’échantillon fritté à1180°C présente de bonnes performances : la valeur de la constante diélectrique est de 833 à 1 KHz, un facteur de couplage électromécanique Kt de l’ordre de0.52 et un rapport kt/kp de l’ordre de 2.08.

Il en résulte que ces céramiques peuvent être utilisés dans les applications des transducteurs ultrasonores.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

Lidjici, H.& Hobar, F.& Rguiti, M.& Trelcat, J. F.& Courtois, C.& Leriche, A.. 2010. Effects of sintering temperature on the structure, microstructure and properties of 0.935 (bi0.5 na0.5) tio3-0.065batio3 piezoelectric ceramics. Sciences et Technologie : Sciences Appliquées،Vol. 2010, no. 32, pp.25-28.
https://search.emarefa.net/detail/BIM-309802

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

Lidjici, H.…[et al.]. Effects of sintering temperature on the structure, microstructure and properties of 0.935 (bi0.5 na0.5) tio3-0.065batio3 piezoelectric ceramics. Sciences et Technologie : Sciences Appliquées No. 32 (2010), pp.25-28.
https://search.emarefa.net/detail/BIM-309802

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

Lidjici, H.& Hobar, F.& Rguiti, M.& Trelcat, J. F.& Courtois, C.& Leriche, A.. Effects of sintering temperature on the structure, microstructure and properties of 0.935 (bi0.5 na0.5) tio3-0.065batio3 piezoelectric ceramics. Sciences et Technologie : Sciences Appliquées. 2010. Vol. 2010, no. 32, pp.25-28.
https://search.emarefa.net/detail/BIM-309802

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes bibliographical references : p. 28

رقم السجل

BIM-309802