Effect of addition SiC particles on the hardness and dry sliding wear of the copper-graphite composite
المؤلفون المشاركون
Chyad, Fadil A.
Aqul, Ibrahim Ramadhan
Matar, Mahdi M.
المصدر
The Iraqi Journal for Mechanical and Materials Engineering
العدد
المجلد 12، العدد 2 (30 يونيو/حزيران 2012)، ص ص. 298-304، 7ص.
الناشر
تاريخ النشر
2012-06-30
دولة النشر
العراق
عدد الصفحات
7
التخصصات الرئيسية
الموضوعات
الملخص AR
يهتم هذا البحث بالمتراكب المكون من النحاس و الكرافيت و الذي يمتلك توصيلية كهربائية و حرارية عالية و يعتبر مزيت جاف للحركة الانزلاقية، و هذا المركب ذو استخدام واسع في التطبيقات الهندسية مثل الفحمة الكهربائية و المحامل.
يهدف البحث إلى دراسة تأثير إضافة دقائق كاربيد السيلكون بنسب مختلفة هي ( 1 %، 1.5 %، 2 %، 2.5 %) إلى مركب من النحاس و الكرافيت مخلوط بنسبة ( نحاس 90 %- كرافيت 10 %)، على مقاومة البلي و الصلادة تحت ظروف الانزلاق الجاف باستعمال تقنية المسمار على القرص، و قد تم تحضير هذا المركب باستعمال طريقة ميتالورجيا المساحيق.
النتائج أظهرت أن المركب المقوى بحبيبات كاربيد السيلكون يملك معدل بلي أقل من المركب الأساس حيث أن المركب الأساس يملك معدل البلي ( 2.85 * 10-7) إضافة حبيبات كاربيد السليكون بنسبة وزنية ( 2.5 % من وزن المركب) ( 0.6 * 10-7) و كذلك نتائج الصلادة أظهرت للمركب الأساس (25، 7.61) بفحص فيكرز و برينيل على التوالي في حين للمركب المقوى كانت (60، 44).
الملخص EN
This research have been devoted to copper-graphite particulate composites which have high thermal / electrical conductivities and excellent dry lubrication for solid contacts and sliding that arise from a synergetic composite effect between copper and graphite.
They have been widely used in their engineering application for sliding components, such as electrical brushes and bearing .This research is devoted to study the effect of addition of SiC particles at different weight percentage(1 %, 1.5 % , 2 % and 2.5 % ), to the copper graphite composite as matrix, which consist of (90 wt % copper–10 wt % graphite), on the resistance wear under dry sliding condition by using pin-on-disk technique and hardness, the structure produced by powder metallurgy methods (P / M).
The results showed that the composite material reinforced with SiC particles has wear rate lower than that of the base composite where, the wear rate of the base composite is (2.58 × 10-7), which is become (0.6 × 10-7) after addition of SiC at (2.5 wt % SiC), and the results of hardness for the base composite are (25, 7.61) in Vickers test and Brinell test which respectively become (60, 44) after addition of (2.5 wt % SiC)
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Chyad, Fadil A.& Aqul, Ibrahim Ramadhan& Matar, Mahdi M.. 2012. Effect of addition SiC particles on the hardness and dry sliding wear of the copper-graphite composite. The Iraqi Journal for Mechanical and Materials Engineering،Vol. 12, no. 2, pp.298-304.
https://search.emarefa.net/detail/BIM-316244
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Chyad, Fadil A.…[et al.]. Effect of addition SiC particles on the hardness and dry sliding wear of the copper-graphite composite. The Iraqi Journal for Mechanical and Materials Engineering Vol. 12, no. 2 (2012), pp.298-304.
https://search.emarefa.net/detail/BIM-316244
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Chyad, Fadil A.& Aqul, Ibrahim Ramadhan& Matar, Mahdi M.. Effect of addition SiC particles on the hardness and dry sliding wear of the copper-graphite composite. The Iraqi Journal for Mechanical and Materials Engineering. 2012. Vol. 12, no. 2, pp.298-304.
https://search.emarefa.net/detail/BIM-316244
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendices : p. 302-304
رقم السجل
BIM-316244
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر