![](/images/graphics-bg.png)
Nonlinear modeling of plain, reinforced and prestressed concrete beams using Finite element method
العناوين الأخرى
النموذج غير الخطي للعتبات الخرسانية العادية و المسلحة و مسبقة الاجهاد باستخدام العناصر المحددة
مقدم أطروحة جامعية
مشرف أطروحة جامعية
أعضاء اللجنة
Shihab, Abd al-Wadud Salman
Jasim, Nabil Abd al-Razzaq
Jabbar, Samir A. B.
الجامعة
جامعة البصرة
الكلية
كلية الهندسة
القسم الأكاديمي
قسم الهندسة المدنية
دولة الجامعة
العراق
الدرجة العلمية
ماجستير
تاريخ الدرجة العلمية
2009
الملخص الإنجليزي
The present work is devoted to study the one dimensional nonlinear finite element analysis of plain, reinforced, and prestessed concrete beams without web reinforcement.
The work established for the rectangular beam sections and static load.
The 2-node isoparametric beam element has been used to represent the concrete while reinforcing bars are idealized as axial members embedded within the concrete elements without any relative displacement between them.
Also perfect bond was assumed between the concrete and steel reinforcement.
For concrete under compressive stresses, the behavior is assumed elastic at the beginning of loading and then elastic-plastic work hardening model followed by a linear degradation in the compressive stress.
The tension behavior of concrete was simulated by a softening tension curve.
For steel the linear elastic model is used to represent the behavior under compressive or tensile stress.
Many different beams are analyzed with different support conditions and concentrated loads.
The resulted load-displacement and moment-curvature curves showed good agreement when compared with the experimental work of Emanoel and the elastic theorem.
Fracture energy is studied in this research ; it has direct influence in plain concrete beams while this effect is smaller in reinforced concrete because of the bond between the steel and concrete, and the maximum load depends on the fracture energy.
When the fracture energy is decreased the failure load is decreased too.
For different fracture energies the failure loads for the same section are different.
The plain concrete failed when the cracks are capable to transmit the stresses across the two faces of the crack.
But the reinforced concrete and prestressed concrete failed when discharge stress in cracks are happened in tensile area (incapable to transmit the stresses across the two faces of the crack).
The longitudinal steel stresses is studied along the span with the load increasing, the stress is increased at maximum moment, and is drawn in figures.
التخصصات الرئيسية
الموضوعات
عدد الصفحات
98
قائمة المحتويات
Table of contents.
Abstract.
Chapter One : introduction.
Chapter Two : review of nonlinear finite element techniques for concrete.
Chapter Three : finite element formulation.
Chapter Four : behavior and modeling of material.
Chapter Five : application, results, and discussions.
Chapter Six : conclusions and recommendations for future works.
References.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Hasan, Abd al-Amir Qasim. (2009). Nonlinear modeling of plain, reinforced and prestressed concrete beams using Finite element method. (Master's theses Theses and Dissertations Master). University of Basrah, Iraq
https://search.emarefa.net/detail/BIM-317177
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Hasan, Abd al-Amir Qasim. Nonlinear modeling of plain, reinforced and prestressed concrete beams using Finite element method. (Master's theses Theses and Dissertations Master). University of Basrah. (2009).
https://search.emarefa.net/detail/BIM-317177
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Hasan, Abd al-Amir Qasim. (2009). Nonlinear modeling of plain, reinforced and prestressed concrete beams using Finite element method. (Master's theses Theses and Dissertations Master). University of Basrah, Iraq
https://search.emarefa.net/detail/BIM-317177
لغة النص
الإنجليزية
نوع البيانات
رسائل جامعية
رقم السجل
BIM-317177
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)