Mechanical properties of composite materials based on epoxy resin reinforced low carbon steel
العناوين الأخرى
الخواص الميكانيكية لمادة مركبة ذات أساس من راتنج الأيبوكسي المقواة بالفولاذ الواطئ الكاربون
المؤلف
المصدر
The Iraqi Journal for Mechanical and Materials Engineering
العدد
المجلد 11، العدد 4 (31 ديسمبر/كانون الأول 2011)، ص ص. 663-671، 9ص.
الناشر
تاريخ النشر
2011-12-31
دولة النشر
العراق
عدد الصفحات
9
التخصصات الرئيسية
الموضوعات
الملخص AR
يهدف هذا البحث لتحضير مادة مركبة ذات أساس من راتنج الإيبوكسي و المقواة بألياف و دقائق من الفولاذ الواطئ الكاربون بكسر حجمي مختلف و كذلك دراسة تأثيره على مقاومة الشد و الانحناء.
تم استخدام ألياف من الفولاذ الواطئ الكاربون و بقطر (0.20 mm) و دقائق غبارية من الفولاذ الواطئ الكاربون كمادة تقوية بكسور حجمية (0,8, 2,4, 4,0, 6,2, و 8,3%). أظهرت نتائج الفحص أن مقاومة الشد تزداد بزيادة الكسر الحجمي لكل من التقوية بالألياف و الدقائق الغبارية, لكن التقوية بالدقائق الغبارية كانت أفضل من الألياف.
كمثال على ذلك عند كسر حجمي %0,8 كانت قيمة مقاومة الشد بالنسبة للدقائق الغبارية حوالي 158 MPa بينما بالألياف 135 MPa و عند نفس الكسر الحجمي. كذلك بالنسبة لاختيار الانحناء فإن مقاومة الانحناء تزداد بزيادة الكسر الحجمي, لكلا الحالتين, لكن في مادة راتنج الإيبوكسي المقواة بدقائق غبارية فإن مقاومة الخضوع وصلت قيمة عليا هي 417.23 MPa عند كسر حجمي 8.3%.
و هذه القيمة أعلى من التقوية بالألياف.
الملخص EN
This work aims to prepare a composite material based on epoxy resin reinforced by fiber and dust particle from low carbon steel with various volume fractions and so, studying their effect on tensile and flexural strength.
Fibers from low carbon steel, with 0.20 mm in diameter and low carbon steel dust particles were used as reinforcement with a volume fraction of (0.8, 2.4, 4.0, 6.2, and 8.3 %).
The results showed that the tensile strength increases as volume fraction increases, for both cases.
But the reinforcement by dust particles has more tensile strength than fiber reinforcement.
For example, at volume fraction 0.8 %, the tensile strength of fiber composite was 135 MPa, whereas tensile strength of dust particles was 158 MPa.
Also the results of flexural test show that the flexural strength increases as volume fraction increases, for both cases, but in low carbon steel dust particles / epoxy composite, the flexural strength reaches a maximum value 417.23 MPa at volume fraction 8.3 %.
This value is higher than that of low carbon steel fiber / epoxy composite.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Naji, Hanin Zuhayr. 2011. Mechanical properties of composite materials based on epoxy resin reinforced low carbon steel. The Iraqi Journal for Mechanical and Materials Engineering،Vol. 11, no. 4, pp.663-671.
https://search.emarefa.net/detail/BIM-321138
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Naji, Hanin Zuhayr. Mechanical properties of composite materials based on epoxy resin reinforced low carbon steel. The Iraqi Journal for Mechanical and Materials Engineering Vol. 11, no. 4 (2011), pp.663-671.
https://search.emarefa.net/detail/BIM-321138
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Naji, Hanin Zuhayr. Mechanical properties of composite materials based on epoxy resin reinforced low carbon steel. The Iraqi Journal for Mechanical and Materials Engineering. 2011. Vol. 11, no. 4, pp.663-671.
https://search.emarefa.net/detail/BIM-321138
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 671
رقم السجل
BIM-321138
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر