![](/images/graphics-bg.png)
Stress concentration factor of expanded aluminum tubes using finite element modeling
العناوين الأخرى
نمذجة عامل تركيز الإجهاد في أنابيب الألمنيوم الممدة باستخدام طريقة العنصر المحدود
المؤلفون المشاركون
Sibi, Abd al-Nur C.
Muhammadi, Lasad
Karsh, Ali
al-Burji, Sami
Barsum, Imad
المصدر
The Journal of Engineering Research
العدد
المجلد 10، العدد 1 (31 مارس/آذار 2013)، ص ص. 88-96، 9ص.
الناشر
جامعة السلطان قابوس كلية الهندسة
تاريخ النشر
2013-03-31
دولة النشر
سلطنة عمان
عدد الصفحات
9
التخصصات الرئيسية
الموضوعات
الملخص AR
تناقش هذه الورقة تناقش علاقات شبه تجريبية لعامل تركيز الإجهاد الأقصى المتكون حول الثقوب الدائرية المضمنة في أنابيب الألمنيوم تحت تأثير عاملين أساسيين يتمثلان في نسبة تمديد الأنبوب و زوايا الجسم المغزلي المستخدم في عملية التمديد .إذ تم تطوير نموذج باستخدام طريقة العنصر المحدود بهدف دراسة عملية تمديد أنبوب المنيوم قياسي يحتوي على ثقوب ذات أحجام مختلفة.
و قد تم استخدام سلوك المرونة المتبوع بسلوك الصلابة المثالي من أجل توصيف الاستجابة الهيكلية للأنابيب تحت تأثير عملية التمديد .كما أخذ بعين الاعتبار اختلاف نسب أقطار الحفر إلى سماكة جدار الأنبوب ، و اختلاف نسب التمديد للأنبوب إلى استخدام زوايا مختلفة للجسم المغزلي في تحديد حالة الإجهاد حول الثقب عند زوايا صفر و90 درجة من المواقع التي تم تحديد أقصى تركيز لعامل الإجهاد عندها.
و بناء على ذلك تم وضع علاقات شبه تجريبية لعامل تركيز الإجهاد الأقصى عن طريق توليد قيم المعامل باستخدام طريقة لاغرانج .
و قد وجد بأن العلاقات التي تم إيجادها قادرة على التنبؤ بعامل تركيز الإجهاد بدقة.
الملخص EN
This paper discusses the development of semi-empirical relations for the maximum stress concentration factor (SCF) around circular holes embedded in aluminum tubes under various expansion ratios and mandrel angles.
Finite element models were developed to study the expansion of a typical aluminum tube with embedded holes of various sizes.
An elastic perfectly-plastic material behaviour was used to describe the structural response of the tubes under expansion.
Various hole -diameter- to -tubewall- thickness ratios, tube expansion ratios, and mandrel angles were considered to determine the stress state around the hole at zero and 90 degree locations from which the maximum SCF was determined.
Semi-empirical relations for the maximum SCF using the Lagrange interpolation formulation were developed.
The developed relations were found to predict the SCFs accurately.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Muhammadi, Lasad& Sibi, Abd al-Nur C.& Karsh, Ali& al-Burji, Sami& Barsum, Imad. 2013. Stress concentration factor of expanded aluminum tubes using finite element modeling. The Journal of Engineering Research،Vol. 10, no. 1, pp.88-96.
https://search.emarefa.net/detail/BIM-330356
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Muhammadi, Lasad…[et al.]. Stress concentration factor of expanded aluminum tubes using finite element modeling. The Journal of Engineering Research Vol. 10, no. 1 (2013), pp.88-96.
https://search.emarefa.net/detail/BIM-330356
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Muhammadi, Lasad& Sibi, Abd al-Nur C.& Karsh, Ali& al-Burji, Sami& Barsum, Imad. Stress concentration factor of expanded aluminum tubes using finite element modeling. The Journal of Engineering Research. 2013. Vol. 10, no. 1, pp.88-96.
https://search.emarefa.net/detail/BIM-330356
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 96
رقم السجل
BIM-330356
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)