Developement the performance of ceramic candle filters for water purification using locally materials

المؤلف

Zayir, Ziyad Rafi

المصدر

The Iraqi Journal for Mechanical and Materials Engineering

العدد

المجلد 13، العدد 1 (31 مارس/آذار 2013)، ص ص. 63-76، 14ص.

الناشر

جامعة بابل كلية الهندسة

تاريخ النشر

2013-03-31

دولة النشر

العراق

عدد الصفحات

14

التخصصات الرئيسية

الهندسة الميكانيكية

الموضوعات

الملخص AR

يقدم هذا البحث تحقيقا على العملية التقنية لتصميم و تصنيع مرشحات الماء الخزفية الشمعية من المواد الأولية العراقية لتحسين نوعية الماء المحلية إلى المقاييس المناسبة للاستهلاك البشري في القرى و المناطق النائية, تقييم الأداء للمرشحات الخزفية الشمعية المصنعة أستند على المسامية, تخفيض مستوى العكورة، إزالة البكتيريا المرضية، تحقيق سهولة في التدفق و الجريان، تخفيض أيونات العسرة و الغير مرغوب فيها, أعتد عدد من التجارب بخلط نسب مختلفة من المواد الأولية الداخلة و منها طين الكاولين المنشط و المفعل بنسبة وزنية تتراوح بين 15 إلى 45 %، فحم الخشب بنسبة 15 إلى 0 %، و مادة البورسيلينات من 15 إلى 40wt %، بحجوم حبيبية ثابتة أقل من 75 ميكرون.

كل هذه الخلطات شكلت تحت درجة حرارة حرق ثابتة 1200 درجة مئوية و ضغط هيدروليكي ثابت قدرة 1325 كيلوغرام \ سنتيمتر مربع.

إن مع اختلاف النسب المئوية تم تحديد أفضل النسب للمواد الداخلة في استخدام لطين المفعل بنسبة 25 %، الفحم بنسبة 35 % ، البورسيلينات بنسبة 40 % للوصول إلى نتائج الاختبارات الأفضل, كذلك تم إجراء عدد من الفحوصات اللازمة لجميع التجارب مثل فحص الكثافة الظاهرية, فحص الامتصاصية, فحص العكورة، فحص المواد الصلبة الذائبة الكلية, فحص البكتيريا البرازية، فحص أيونات ماء السالبة و الموجبة.

كان نموذج المرشح المثالي الناتج بمسامية 62.3 %, أما درجة عكوره الماء فقد انخفضت من 167 إلى أقل من وحدة عكوره قيسية.

الملخص EN

This research presents an investigation on the technical feasibility of design and manufacturing the ceramic water candle filters made from Iraqi raw materials to improve the domestic water quality to standards suitable for human consumption in villages and country side, the performance assessment is based on its porosity, turbidity reduction, bacteria removal, ease of flow, hardness and undesired ions reduction, so number of experiments were done by mixing different percent of the raw materials of which activated kaolin clay 15 to 45 wt %, coal 15 to 40 wt %, and porcelanite 15 to 40 Wt %, with same grain sizes less than 75 microns.

All of these mixtures were molded under constant firing temperature and hydraulic compression pressure (1200 0C, and 1325 kg / cm2).

The effect of different feed percent for each material gave the optimum percent of 25 % wt activated kaolin clay, 35 % wt coal, 40 % wt porcelanite reaching to the better tests results, number of tests also is made over the experiments range such as apparent density, porosity, wettability, turbidity, TDS, E Coli, water ions examination tests, the produced filter porosity was 62.3 %, water turbidity reduced from 167 NTU to less than 5 NTU.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

Zayir, Ziyad Rafi. 2013. Developement the performance of ceramic candle filters for water purification using locally materials. The Iraqi Journal for Mechanical and Materials Engineering،Vol. 13, no. 1, pp.63-76.
https://search.emarefa.net/detail/BIM-330511

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

Zayir, Ziyad Rafi. Developement the performance of ceramic candle filters for water purification using locally materials. The Iraqi Journal for Mechanical and Materials Engineering Vol. 13, no. 1 (2013), pp.63-76.
https://search.emarefa.net/detail/BIM-330511

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

Zayir, Ziyad Rafi. Developement the performance of ceramic candle filters for water purification using locally materials. The Iraqi Journal for Mechanical and Materials Engineering. 2013. Vol. 13, no. 1, pp.63-76.
https://search.emarefa.net/detail/BIM-330511

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes bibliographical references : p. 74-76

رقم السجل

BIM-330511