Numerical and expreimental estimation of shrinkage cavities during al-alloys casting
العناوين الأخرى
التقدير العددي و التجريبي لفجوات التقلص خلال سباكة سبائك الألمنيوم
المؤلفون المشاركون
Kushnaw, Farhad Muhammad Uthman
Husayn, Imad Ahmad
Jabr, Adnan Shamkhi
المصدر
Basrah Journal for Engineering Sciences
العدد
المجلد 8، العدد 1 (31 ديسمبر/كانون الأول 2008)، ص ص. 77-89، 13ص.
الناشر
تاريخ النشر
2008-12-31
دولة النشر
العراق
عدد الصفحات
13
التخصصات الرئيسية
الموضوعات
الملخص AR
إن الهدف من هذا البحث هو تخمين عيوب الانكماش في مسبوكات الألمنيوم - سيلكون و ذلك بتحديد المعاملات و التقنيات المناسبة التي ممكن تطبيقها في نظام محاكاة السباكة.
و يهدف أيضا لتحديد دور محتوى السليكون في كمية و شكل و توزيع هذه العيوب.
نفذت الحلول العددية باستخدام طريقة الفروقات المتناهية ثلاثية الأبعاد, للمسبوكة و لا يمكن تخمينها.
تعاني السبائك قليلة السليكون من الفجوات فقط و التي يمكن التنبؤ بها برسم خطوط زمن التجميد و اخيرا, تم التوصل إلى أن قيمة التدرج الحراري الحرجة لظهور المسامات في السبائك اليوتكنيكية (Al-12%Si) تساوي °C/cm 1.3.
الملخص EN
The aim of this research is to predict the shrinkage defects in Al-Si castings by determination the suitable parameters and techniques which can be applied in casting simulation system.
Also, it aims to specify the role of silicon content in amount, morphology, and distribution of these defects* The Numerical solution has been carried out using an explicit 3-D finite difference method for the given system of the casting and a mold.
Additionally, an experimental casting of the studied samples was achieved.
It was found that the shrinkage porosities increased with increasing the silicon content up to 7 %, so at this peak, they spread in alt cast regions and cannot be predicted.
The low silicon alloys suffered from only the shrinkage cavities defects that can be predicted by mapping the solidus time contours.
Finally, it was concluded that the critical temperature gradient value of the porosities development in the eutectic (AM2 % Sij alloys was 1.3 °C / cm,
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Jabr, Adnan Shamkhi& Kushnaw, Farhad Muhammad Uthman& Husayn, Imad Ahmad. 2008. Numerical and expreimental estimation of shrinkage cavities during al-alloys casting. Basrah Journal for Engineering Sciences،Vol. 8, no. 1, pp.77-89.
https://search.emarefa.net/detail/BIM-337454
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Jabr, Adnan Shamkhi…[et al.]. Numerical and expreimental estimation of shrinkage cavities during al-alloys casting. Basrah Journal for Engineering Sciences Vol. 8, no. 1 (2008), pp.77-89.
https://search.emarefa.net/detail/BIM-337454
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Jabr, Adnan Shamkhi& Kushnaw, Farhad Muhammad Uthman& Husayn, Imad Ahmad. Numerical and expreimental estimation of shrinkage cavities during al-alloys casting. Basrah Journal for Engineering Sciences. 2008. Vol. 8, no. 1, pp.77-89.
https://search.emarefa.net/detail/BIM-337454
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendix : p. 82-89
رقم السجل
BIM-337454
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر