Estimating the limits of stability under several working conditions at experimental turning
العناوين الأخرى
تخمين حدود الاستقرارية تحت ظروف عمل متعددة خلال عملية الخراطة عمليا
المؤلف
المصدر
al-Rafidain Engineering Journal
العدد
المجلد 17، العدد 6 (31 ديسمبر/كانون الأول 2009)، ص ص. 77-91، 15ص.
الناشر
تاريخ النشر
2009-12-31
دولة النشر
العراق
عدد الصفحات
15
التخصصات الرئيسية
الملخص AR
تحديد الاهتزازات الناشئة تلقائيا (الاصطكاك) أثناء عملية القطع نتيجة للتداخل بين أداة القطع (قلم الخراطة) و بين القطعة المشغولة يعتبر مهما كمرشد لمستخدم ماكنة القطع للاختيار الأمثل لعمق القطع و السرعة الدورانية لمعدل التغذية المعني، الذي سوف يحقق أقصى معدل إزالة للرايش من دون حدوث هذه الاهتزازات الغير مرغوب فيها و التي تفسد السطح المشغول بآثارها و تنعكس سلبا على نظام القطع ككل.
و هذا يمكن تحقيقه بأجراء عدد من البحوث العملية.
في هذه الدراسة تم أجراء عملية القطع باستخدام الخراطة الطولية لمكنة الخراطة نوع هندستون و باستخدام قطع كاربيدية لقطع عدة قطع اسطوانية مشغولة من الصلب متوسط الكاربون ذات قطر 32 ملم طول 70 سم بدون استخدام سائل تبريد لتحديد حدود الاستقرارية التي مثلت بواسطة منحنيات مع السرعة الدورانية و التي فصلت ما بين المساحات المستقرة و الغير مستقرة باعتبارها الحد الفاصل و لعدة معدلات تغذية و التي حققت اعظم إنتاجية مع خشونة سطحية مقبولة بغياب الاهتزازات الاصطكاكية، و كذلك تمت دراسة مدى تأثير معدل التغذية على استقرارية نظام القطع و على سعة الاهتزاز بثبوت عمق و سرعة القطع.
الملخص EN
Predicting the Self-Excited vibrations (Chatter) during the cutting process as a result of the interaction between the cutting tool and work-piece is important as a guide for the cutting machine user for an optimal selection of the back engagement of tool in work piece (depth of cut), the rotational Speed for the specific feed rate which will produce maximum chip removal with out these undesirable vibrations.
Such undesirable vibrations can spoil the cutting surface with chatter marks, which will have adverse effects on the whole cutting system.
This can be achieved by performing several experimental researches.
In the present study, a cutting process was performed by using the slide feeding of Hindustan lathe machine and sintered carbide inserts to cut several cylindrical shafts of 32 mm in diameter and 70 cm long steel AISI1050 with out using coolant lubrication to specify the stability limits that represented by curves with the rotational speeds which separate stable and unstable zones for maximum productivity and accepted surface roughness.
Also study the effect of feed rate upon the stability and the amplitude of vibration for constant depth of cut and rotational speed.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Samarji, Ramiz Said Matti. 2009. Estimating the limits of stability under several working conditions at experimental turning. al-Rafidain Engineering Journal،Vol. 17, no. 6, pp.77-91.
https://search.emarefa.net/detail/BIM-338034
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Samarji, Ramiz Said Matti. Estimating the limits of stability under several working conditions at experimental turning. al-Rafidain Engineering Journal Vol. 17, no. 6 (Dec. 2013), pp.77-91.
https://search.emarefa.net/detail/BIM-338034
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Samarji, Ramiz Said Matti. Estimating the limits of stability under several working conditions at experimental turning. al-Rafidain Engineering Journal. 2009. Vol. 17, no. 6, pp.77-91.
https://search.emarefa.net/detail/BIM-338034
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 91
رقم السجل
BIM-338034
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر