Adsorption of chromium (Vi)‎ from aqueous solutions using low cost adsorbent : equilibrium and regeneration studies

العناوين الأخرى

إمتزاز الكروم الخماسي من المحاليل المائية بإستخدام مواد مازة واطئة الكلفة : دراسات التوازن و إعادة التنشيط

المؤلف

al-Dakhil, Ihsan Habib

المصدر

Journal of Engineering

العدد

المجلد 19، العدد 11 (30 نوفمبر/تشرين الثاني 2013)، ص ص. 1395-1406، 12ص.

الناشر

جامعة بغداد كلية الهندسة

تاريخ النشر

2013-11-30

دولة النشر

العراق

عدد الصفحات

12

التخصصات الرئيسية

الكيمياء

الموضوعات

الملخص AR

تم دراسة امتزاز الكروم الخماسي من المحاليل المائية بواسطة ورق الشاي المستهلك بتغيير التراكيز الابتدائية للكروم الخماسي، كمية المادة المازة، الدالة الحامضية و زمن التلامس باستخدام نمط تجارب الوجبات بثبوت درجة الحرارة.

تجارب الامتزاز حدثت تحت درجة حرارة 30 م لدراسة تأثير المتغيرات الأربعة على امتزاز الكروم للحصول على موديل رياضي يصف كفاءة إزالة الكروم الخماسي.

نتائج التحليل وضحت أن النتائج العملية كانت متطابقة مع معادلة من الدرجة الثانية بمعامل تصحيح مساويا (0.9891).

العوامل التشغيلية المثلى من التراكيز الابتدائية للكروم الخماسي، كمية المادة المازة، الدالة الحامضية و زمن التلامس كانت 50 ملغم / غم، 0.7625 غم، 3 و 100 دقيقة، على الترتيب.

عند تلك الظروف أعلى نسبة للإزالة كانت 92.88 % أثبتت بتطابق المحسوب من الموديل الرياضي مع التجارب العملية.

كمية الكروم الخماسي الممتز على ورق الشاي المستهلك تأثر بشكل كبير بالدالة الحامضية للمحلول.

بيانات الاتزان مثلت مع موديلات متساوية الحرارة (Langmuir) و (Freundlich).

موديل (Langmuir) مثل بصورة جيدة بيانات الاتزان مع معامل تصحيح أقترب من الواحد مقارنة مع موديل (Freundlch).

أعلى نسبة للامتزاز كانت 47.98 ملغم / غم عند الظروف المثلى.

تم إعادة تنشيط المادة المازة .

الملخص EN

The adsorption of Cr (VI) from aqueous solution by spent tea leaves (STL) was studied at different initial Cr (VI) concentrations, adsorbent dose, pH and contact time under batch isotherm experiments The adsorption experiments were carried out at 30°C and the effects of the four parameters on chromium uptake to establish a mathematical model description percentage removal of Cr (VI).

The analysis results showed that the experimental data were adequately fitted to second order polynomial model with correlation coefficients for this model was (R2 = 0.9891).

The optimum operating parameters of initial Cr (VI) concentrations, adsorbent dose, pH and contact time were 50 mg / l, 0.7625 g, 3 and 100 min, respectively.

At these conditions, the maximum percentage removal of Cr (VI) was 92.88 %.

The amounts of Cr (VI) adsorbed onto STL were highly affected by the solution pH value.

Equilibrium data was modeled with Langmuir and Freundlich models isotherms.

Langmuir model is found very well represent the equilibrium data with correlation factor is close to unity than the Freundlich model.

The maximum monolayer adsorption capacity was found to be 47.98 mg / g at optimum conditions.

The saturated adsorbent was regenerated by base treatment and found to be reuse efficiently after fourth cycle at optimum conditions as well as for safe disposal of base that contains high concentration of Cr (VI) is precipitated as barium chromate.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

al-Dakhil, Ihsan Habib. 2013. Adsorption of chromium (Vi) from aqueous solutions using low cost adsorbent : equilibrium and regeneration studies. Journal of Engineering،Vol. 19, no. 11, pp.1395-1406.
https://search.emarefa.net/detail/BIM-341671

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

al-Dakhil, Ihsan Habib. Adsorption of chromium (Vi) from aqueous solutions using low cost adsorbent : equilibrium and regeneration studies. Journal of Engineering Vol. 19, no. 11 (Nov. 2013), pp.1395-1406.
https://search.emarefa.net/detail/BIM-341671

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

al-Dakhil, Ihsan Habib. Adsorption of chromium (Vi) from aqueous solutions using low cost adsorbent : equilibrium and regeneration studies. Journal of Engineering. 2013. Vol. 19, no. 11, pp.1395-1406.
https://search.emarefa.net/detail/BIM-341671

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes appendices : p. 1404-1406

رقم السجل

BIM-341671