Aqueous erosion of polymeric materials used in water supply systems

العناوين الأخرى

تآكل المواد اللدنة المستخدمة في أنظمة نقل المياه بآلية الاقتلاع (الحت)‎ بالسوائل المائية

المؤلف

Zaamut, Mahmud Salih

المصدر

Journal of King Abdulaziz University : Engineering Sciences

العدد

المجلد 17، العدد 1 (30 يونيو/حزيران 2006)، ص ص. 137-156، 20ص.

الناشر

جامعة الملك عبد العزيز مركز النشر العلمي

تاريخ النشر

2006-06-30

دولة النشر

السعودية

عدد الصفحات

20

التخصصات الرئيسية

الهندسة الميكانيكية

الموضوعات

الملخص AR

تصنع عناصر أنظمة نقل المياه مثل الأنابيب, و الأكواع, و الوصلا المختلفة من مواد اللدائن.

و بسبب طبيعة عملها تتعرض هذه العناصر للتآكل بآلية الاقتلاع أو الحت (Erosion) نتيجة صدمها بتيارات الماء و ما تحتويه من مواد علقة صلبة أو ذائبة.

يهدف هذا البحث لدراسة مقاومة هذه العناصر للتآكل بآلية الاقتلاع. و قد تم اختيار ثلاثة أنواع من المواد اللدنة تستخدم غالبا في إنتاج العناصر المذكورة و هي : (بي في سي PVC) عالي الضغط و (بي في سي PVC) منخفض الضغط و بولي بروبايلين (PP)؟ كما استخدمت أربعة أنواع من المياه المختلفة كوسائط اقتلاع و هي : الماء المقطر (Distilled water), الماء المحلى (Desalinated water), ماء البحر (Sea water), و ماء الآبار (Well water).

و قد تمت دراسة تأثيرات كل من سرعة الماء و وزمن استمرار الاقتلاع على سلوك تآكل هذه المواد المذكورة. أجريت جميع التجارب المعملية اللازمة في وسط معايير عند درجة حرارة (23° و نسبة رطوبة قدرها (40%).

و قد بينت التجارب أن تآكل جميع المواد اللدنة المختبرة يزداد مع زيادة كل من سرعة التيار و زمن الاقتلاع أو كليهما معا كما بينت أن التآكل يزداد بشكل كبير عند قيم معينة للسرعة و الزمن أو لأحدهما.

و بينت التجارب أيضا أن وجود الشوائب في المياه له تأثير كبير على تآكل المواد, و أن مادة (بي فس سي PVC) عالية الضغط هي الأعلى مقاومة للتآكل بآلية الاقتلاع (الحت Erosion) بين المواد المختبرة.

الملخص EN

Elements of water supply systems such as pipes, elbows, tee connections, …etc., are made of polymeric materials.

They are subjected to erosion by streams of water and contaminants.

The objective of this work is to investigate the erosion resistance of the polymers that are locally used to produce such components.

Three materials were examined, namely: High pressure PVC (HP-PVC), Low pressure PVC (LP-PVC), and Polypropylene (PP).

Four types of water were used to erode the polymeric specimens: Distilled water (DiW), Desalinated water (DeW), Sea water (SW), and untreated deep ground (Well) water (WW).

The effects of water stream velocity and eroding time on the erosion wear behaviour of the polymers were examined.

The work was conducted under controlled environment of 23 °C temperature and 40% humidity.

Results show that erosive wear of all materials increases with the increase in stream velocity and/or eroding time.

It also indicates that at certain values of velocity and/or eroding time the increase in rate was more pronounced.

In addition the presence of water contaminants has drastic effects on the erosion volume.

Results also show that HP-PVC has the highest erosion resistance.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

Zaamut, Mahmud Salih. 2006. Aqueous erosion of polymeric materials used in water supply systems. Journal of King Abdulaziz University : Engineering Sciences،Vol. 17, no. 1, pp.137-156.
https://search.emarefa.net/detail/BIM-344214

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

Zaamut, Mahmud Salih. Aqueous erosion of polymeric materials used in water supply systems. Journal of King Abdulaziz University : Engineering Sciences Vol. 17, no. 1 (2006), pp.137-156.
https://search.emarefa.net/detail/BIM-344214

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

Zaamut, Mahmud Salih. Aqueous erosion of polymeric materials used in water supply systems. Journal of King Abdulaziz University : Engineering Sciences. 2006. Vol. 17, no. 1, pp.137-156.
https://search.emarefa.net/detail/BIM-344214

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes bibliographical references : p. 152-154

رقم السجل

BIM-344214