Mechanical and morphological properties of HDPE : pp and LDPE : PP polymer blend composites reinforced with TiO2 particles
العناوين الأخرى
الخواص الميكانيكية و المجهرية لمتراكبات الخلائط البوليمرية HDPE : PP LDPE : PP المقواة بدقائق أوكسيد التيتانيوم
المؤلفون المشاركون
al-Shaliji, Sihama Isa Salih
Hammud, Abd al-Khaliq Fawzi
Abd al-Salam, Alya Husayn
المصدر
Engineering and Technology Journal
العدد
المجلد 31، العدد 12 (31 أغسطس/آب 2013)، ص ص. 2211-2224، 14ص.
الناشر
تاريخ النشر
2013-08-31
دولة النشر
العراق
عدد الصفحات
14
التخصصات الرئيسية
الموضوعات
الملخص AR
في هذا البحث تم تحضير مجموعتين من الخلائط البوليمرية المجموعة الأولى تضمنت (بولي بروبيلين PP و بولي اثيلين عالي الكثافة HDPE) و بينما المجموعة الثانية تضمنت (بولي بروبيلين PP و بولي اثيلين واطي الكثافة LDPE) كلا المجموعتين حضرت بنسب من البولي بروبيلين (80% and 20%) .
ومن نتائج اختبار الخواص الميكانيكية للخلائط البوليمرية المحضرة حددت القيمة المثلى لنسب الخلط و المتمثلة في (20% HDPE : 80% PP) و (20% LDPE : 80% PP) و التي بعد ذلك تم تقويتهما بدقائق ثنائي أوكسيد التيتانيوم (TiO2) بنسب وزنية (8 wt% and 5%, 2%) و حجم حبيبي (μm 0.421).
ولغرض تجانس الخلط تم مزج دقائق TiO2 مع الحبيبات البوليمرية ميكانيكيا قبل إجراء عملية البثق باستخدام أحادية المحور.
و أظهرت النتائج زيادة في الخصائص الميكانيكية مع زيادة محتوى دقائق التقوية بإستثناء المطيلية.
وعلاوة على ذلك سجلت النتائج أعلى القيم لمقاومة الصدمة و متانة الكسر عند TiO22 wt% و بلغت (312.5 Mpa و 572.8 Mpa) على التوالي لمتراكبات الخليط البوليمرية (20% HDPE : 80% PP) و لمتراكبات الخليط البوليمرية (20% LDPE : 80% PP) بلغت قيم مقاومة الصدمة و متانة الكسر (262.5 Mpa و 468 Mpa) على التوالي.
الخصائص الميكانيكية للمراكبات الحضرة ذات أساس (20% HDPE + 80% PP) هي أعلى من مثيلاتها ذات أساس (20% LDPE + 80% PP).
صور المجهر الإلكتروني المسح أظهرت أن هناك ترابط جيد في المناطق ما بين مادة التقوية و مادة الأساس.
الملخص EN
In this research two groups of polymer blends have been prepared First group included (High density polyethylene (HDPE) : Polypropylene (PP)) While the Second group (included Low density polyethylene (LDPE) : Polypropylene (PP)) both groups prepared with polypropylene of (20 % and 80 %).
From the results of tensile test for the prepared blends it has been showed that the optimum blending ratio was (20 % LDPE : 80 % PP and 20 % HDPE : 80 % PP) which thenreinforced with (2, 5 and 8wt of titanium dioxide (TiO2), particle size (0.421μm).
Titaniaparticles were mechanically mixed with the polymers prior tomelt mixing for better dispersion.
Polymerblend composites were obtained by using single screw extruder.
Results showed that mechanical properties increased as titania content increased except elongation.
Furthermore the result recorded highest values ofimpact strength and fracture toughness at2 % wt TiO2which is 312 Mpa and 572.8Mparespectively, for the polymer blend (20%HDPE : 80 % PP) composite and for the polymer blend (20 %LDPE : 80 % PP) composites the impact strength and fracture toughness are 262.5 Mpa and 468 Mpa respectively.
The mechanical properties values of 20 %HDPE : 80 % PP is higher than 20 % LDPE : 80 % PP polymer blendcomposites.
Scanning electron microscopy (SEM) imagesshowed that there isbonding developed between TiO2 and polymer blends in some regions.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Shaliji, Sihama Isa Salih& Hammud, Abd al-Khaliq Fawzi& Abd al-Salam, Alya Husayn. 2013. Mechanical and morphological properties of HDPE : pp and LDPE : PP polymer blend composites reinforced with TiO2 particles. Engineering and Technology Journal،Vol. 31, no. 12, pp.2211-2224.
https://search.emarefa.net/detail/BIM-345741
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Hammud, Abd al-Khaliq Fawzi…[et al.]. Mechanical and morphological properties of HDPE : pp and LDPE : PP polymer blend composites reinforced with TiO2 particles. Engineering and Technology Journal Vol. 31, no. 12 A (2013), pp.2211-2224.
https://search.emarefa.net/detail/BIM-345741
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Shaliji, Sihama Isa Salih& Hammud, Abd al-Khaliq Fawzi& Abd al-Salam, Alya Husayn. Mechanical and morphological properties of HDPE : pp and LDPE : PP polymer blend composites reinforced with TiO2 particles. Engineering and Technology Journal. 2013. Vol. 31, no. 12, pp.2211-2224.
https://search.emarefa.net/detail/BIM-345741
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 2223-2224
رقم السجل
BIM-345741
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر