Capability of (OXY-liquefied petroleum GAS) flame technique to produce engineering components of low carbon steel
العناوين الأخرى
قابلية قطع المعادن بشعلة الأوكسى-غاز البترول السائل لإنتاج أجزاء هندسية من الفولاذ الكاربوني
المؤلف
المصدر
The Iraqi Journal for Mechanical and Materials Engineering
العدد
المجلد 13، العدد 4 (31 ديسمبر/كانون الأول 2013)، ص ص. 734-749، 16ص.
الناشر
تاريخ النشر
2013-12-31
دولة النشر
العراق
عدد الصفحات
16
التخصصات الرئيسية
الملخص EN
In this research, OXY–LPG gas flame through Robotic cutting machine was used.
Many experiments had been done in order to achieve proper processing conditions for clean cut.
The main parameters control the cutting process are LPG and Oxygen pressures, torch speed, the choice of nozzle and the gap between the flame and the piece.
Samples of carbon steel were used with thicknesses range (25–35) mm under different process conditions to produce clean cut (kerf) within (2) mm width in order to apply programs capable of producing spur gear shapes and racks.
The attempts succeeded only in producing spur gear with clean cut.
The ability of torch to move in a circle of diameter around 2000mm which gives high maneuvering to produce large shapes under the conditions were mentioned in this research, which is out of the capability of typical production machines.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Rashid, Talib Husayn. 2013. Capability of (OXY-liquefied petroleum GAS) flame technique to produce engineering components of low carbon steel. The Iraqi Journal for Mechanical and Materials Engineering،Vol. 13, no. 4, pp.734-749.
https://search.emarefa.net/detail/BIM-363683
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Rashid, Talib Husayn. Capability of (OXY-liquefied petroleum GAS) flame technique to produce engineering components of low carbon steel. The Iraqi Journal for Mechanical and Materials Engineering Vol. 13, no. 4 (2013), pp.734-749.
https://search.emarefa.net/detail/BIM-363683
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Rashid, Talib Husayn. Capability of (OXY-liquefied petroleum GAS) flame technique to produce engineering components of low carbon steel. The Iraqi Journal for Mechanical and Materials Engineering. 2013. Vol. 13, no. 4, pp.734-749.
https://search.emarefa.net/detail/BIM-363683
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendices : p. 740-749
رقم السجل
BIM-363683
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر