Estimation of cutting tool wear in turning using taguchi method depending onweight of the removed tool metal
العناوين الأخرى
تخمين تآكل عدة القطع في عملية الخراطة بتطبيق طريقة تاكوجي اعتمادا على الوزن المفقود من العدة
المؤلفون المشاركون
al-Baghdadi, Bara M. H.
al-Khafaji, Muhannad M. H.
Ulwan, Husam Laftah
Abbas, Asad Ali
المصدر
Engineering and Technology Journal
العدد
المجلد 32، العدد 1A (31 يناير/كانون الثاني 2014)، ص ص. 24-33، 10ص.
الناشر
تاريخ النشر
2014-01-31
دولة النشر
العراق
عدد الصفحات
10
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الملخص EN
This paper focuses on using Taguchi method to determine the optimum turning parameters such as spindle speed, depth of cut, and feed rate, denoted by factor symbols A, B, and C respectively.
The effect of cutting parameters on tool wear is depended on the concept of removed weight from the tool metal during machining.
The material that has been used as a work piece is high carbon steel and carbide insert DNMG 443-15 as a cutting tool.
Taguchi orthogonal array L9, quality characteristic "smaller is better", and ANOVA were used to achieve the goal of the research.
The results obtained showed that spindle speed is the significant factor of the process followed by the feed rate in terms of their contribution in analysis.
The optimum combination of parameters, which was found by applying Taguchi method, is that designated by A2B1C1.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ulwan, Husam Laftah& al-Baghdadi, Bara M. H.& al-Khafaji, Muhannad M. H.& Abbas, Asad Ali. 2014. Estimation of cutting tool wear in turning using taguchi method depending onweight of the removed tool metal. Engineering and Technology Journal،Vol. 32, no. 1A, pp.24-33.
https://search.emarefa.net/detail/BIM-371210
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ulwan, Husam Laftah…[et al.]. Estimation of cutting tool wear in turning using taguchi method depending onweight of the removed tool metal. Engineering and Technology Journal Vol. 32, no. 1A (2014), pp.24-33.
https://search.emarefa.net/detail/BIM-371210
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ulwan, Husam Laftah& al-Baghdadi, Bara M. H.& al-Khafaji, Muhannad M. H.& Abbas, Asad Ali. Estimation of cutting tool wear in turning using taguchi method depending onweight of the removed tool metal. Engineering and Technology Journal. 2014. Vol. 32, no. 1A, pp.24-33.
https://search.emarefa.net/detail/BIM-371210
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 32-33
رقم السجل
BIM-371210
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر