Effect of quenching media, heat treatment and alloying elements on properties of Al-Si-Mg alloy
المؤلفون المشاركون
al-Uqayli, Abd al-Aziz O. Musa
al-Murshidi, Jasim M. Salman
Jasim, Abd Allah H. Mahdi
المصدر
Journal of University of Babylon for Engineering Sciences
العدد
المجلد 22، العدد 4 (31 ديسمبر/كانون الأول 2014)، ص ص. 803-815، 13ص.
الناشر
تاريخ النشر
2014-12-31
دولة النشر
العراق
عدد الصفحات
13
التخصصات الرئيسية
الموضوعات
الملخص AR
سبائك (ألمنيوم-سيلكون-مغنيسيوم) تستخدم بصورة واسعة في صناعة الطائرات و السيارات لامتلاكها خواص جيدة، و متانة عالية نسبة إلى وزنها و مقاومة تآكل جيدة.
يهدف البحث إلى تحضير السمكة Al-Si-Mg و دراسة تأثير وسط الإخماد (محلول البوليمر و الماء) و المعاملة الحرارية و تأثير إضافة عناصر السبك (البورون و التيتانيوم) على خصائص السبيكة المحضرة مثل الصلادة الدقيقة و دراسة سلوك الأصلاد الحراري مع زمن التعتيق الاصطناعي ((10-2 ساعة عند درجات الحرارة (200، 175، 150).
بينت النتائج أن إضافة 0.15 % B مع 1 % Ti معا للسبيكة الأساس أدى إلى تحسن صلادة فكرز بنسبة (57 %) عند ظرف المجانسة بالمقارنة مع السبيكة الأساس.
و كذلك النتائج أظهرت تحسن في الاستقرارية الحرارية عند درجة حرارة تعتيق ١٧٥ عند الإخماد في محلول البوليمر مقارنة مع الإخماد في الماء.
تم قياس الخصائص الميكانيكية للسبائك المحضرة باستخدام تقنية الموجات فوق الصوتية و كذلك تم إظهار البنية المجهرية للسبائك المحضرة باستخدام المجهر الضوئي.
الملخص EN
Al-Si-Mg alloys have been widely used in automotive and aircraft industries for their good properties, high strength-to-weight ratio and good corrosion resistance.
This study aims to preparing of Al- Si-Mg alloy and study the effect of quenching media (polymer solution and water), heat treatment and effect of addition alloying elements (B & Ti) on the properties of prepared Al-Si-Mg alloy such as microhardnes and studying the thermal age hardening behavior with artificial ageing time (2-10) hours at temperatures (150, 175, 200).
The results showed that the addition of 0.15 % B with 1 % Ti together to base alloy improve Vickers microhardness by (57 %) at homogenization condition compared with the base alloy, also the results showed that improvement in thermal stability at ageing temperature 175 when quenching in polymer solution in comparison with the quenching in water.
Mechanical properties of prepared alloys were measured by using ultrasonic wave technique, also the microstructure of prepared alloys were appeared by using optical microscopic.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Uqayli, Abd al-Aziz O. Musa& al-Murshidi, Jasim M. Salman& Jasim, Abd Allah H. Mahdi. 2014. Effect of quenching media, heat treatment and alloying elements on properties of Al-Si-Mg alloy. Journal of University of Babylon for Engineering Sciences،Vol. 22, no. 4, pp.803-815.
https://search.emarefa.net/detail/BIM-441643
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Uqayli, Abd al-Aziz O. Musa…[et al.]. Effect of quenching media, heat treatment and alloying elements on properties of Al-Si-Mg alloy. Journal of University of Babylon for Engineering Sciences Vol. 22, no. 4 (2014), pp.803-815.
https://search.emarefa.net/detail/BIM-441643
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Uqayli, Abd al-Aziz O. Musa& al-Murshidi, Jasim M. Salman& Jasim, Abd Allah H. Mahdi. Effect of quenching media, heat treatment and alloying elements on properties of Al-Si-Mg alloy. Journal of University of Babylon for Engineering Sciences. 2014. Vol. 22, no. 4, pp.803-815.
https://search.emarefa.net/detail/BIM-441643
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 815
رقم السجل
BIM-441643
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر