Investigation on Flow-Induced Noise due to Backflow in Low Specific Speed Centrifugal Pumps

الملخص EN

Flow-induced noise causes disturbances during the operation of centrifugal pumps and also affects their performance.

The pumps often work at off-design conditions, mainly at part-load conditions, because of frequent changes in the pump device system.

Consequently numerous unstable phenomena occur.

In low specific speed centrifugal pumps the main disturbance is the inlet backflow, which is considered as one of the most important factors of flow-induced noise and vibration.

In this study, a test rig of the flow-induced noise and vibration of the centrifugal pump was built to collect signals under various operating conditions.

The three-dimensional unsteady flow of centrifugal pumps was calculated based on the Reynolds-averaged equations that resemble the shear stress transport (SST) k-ω turbulence model.

The results show that the blade passing frequency and shaft frequency are dominant in the spectrum of flow-induced noise, whereas the shaft component, amplitude value at shaft frequency, and peak frequencies around the shaft increase with decreasing flow.

Through flow field analysis, the inlet backflow of the impeller occurs under 0.7 times the design flow.

The pressure pulsation spectrum with backflow conditions validates the flow-induced noise findings.

The velocity characteristics of the backflow zone at the inlet pipe were analyzed, and the dynamic characteristics of the backflow eddy during one impeller rotating period were simultaneously obtained by employing the backflow conditions.

A flow visualization experiment was performed to confirm the numerical calculations.