Fabrication of Single-Phase NiTi by Combustion Synthesis of Mechanically Activated Powders
المؤلفون المشاركون
Mousavi Nasab, S.
Aboutalebi, M.
Vahdati Khaki, J.
Seyedein, S. H.
Molavi Kakhki, A.
المصدر
العدد
المجلد 2012، العدد 2012 (31 ديسمبر/كانون الأول 2012)، ص ص. 1-6، 6ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2012-12-30
دولة النشر
مصر
عدد الصفحات
6
التخصصات الرئيسية
الملخص EN
Single-phase NiTi was fabricated through the thermal explosion mode of combustion synthesis of mechanically activated powders.
Combustion and ignition temperatures of combustion synthesis were investigated in different milling times.
In this process, equiatomic powder mixtures of nickel and titanium were activated by planetary ball mill and pressed into disk-shaped pellets then heated in a tube furnace, while temperature-time profile was recorded.
X-ray diffraction analysis (XRD) was performed on milled powders as well as synthesized samples.
Scanning electron microscopy (SEM) was also used to study the microstructural evolution during milling.
The results showed that there was a threshold milling time to obtain single-phase NiTi.
It was also seen that the ignition temperature and combustion temperature were reduced significantly by increasing milling time.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Mousavi Nasab, S.& Aboutalebi, M.& Seyedein, S. H.& Molavi Kakhki, A.& Vahdati Khaki, J.. 2012. Fabrication of Single-Phase NiTi by Combustion Synthesis of Mechanically Activated Powders. Journal of Metallurgy،Vol. 2012, no. 2012, pp.1-6.
https://search.emarefa.net/detail/BIM-450090
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Mousavi Nasab, S.…[et al.]. Fabrication of Single-Phase NiTi by Combustion Synthesis of Mechanically Activated Powders. Journal of Metallurgy No. 2012 (2012), pp.1-6.
https://search.emarefa.net/detail/BIM-450090
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Mousavi Nasab, S.& Aboutalebi, M.& Seyedein, S. H.& Molavi Kakhki, A.& Vahdati Khaki, J.. Fabrication of Single-Phase NiTi by Combustion Synthesis of Mechanically Activated Powders. Journal of Metallurgy. 2012. Vol. 2012, no. 2012, pp.1-6.
https://search.emarefa.net/detail/BIM-450090
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-450090
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر