Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences
المؤلفون المشاركون
المصدر
International Journal of Rotating Machinery
العدد
المجلد 2009، العدد 2009 (31 ديسمبر/كانون الأول 2009)، ص ص. 1-12، 12ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2009-10-08
دولة النشر
مصر
عدد الصفحات
12
التخصصات الرئيسية
الملخص EN
A numerical investigation has been performed to study the influences of cooling injection from the blade tip surface on controlling tip clearance flow in an unshrouded, high-turning axial turbine cascade.
Emphasis is put on the analysis of the effectiveness of tip injection when the approaching flow is at design and off-design incidences.
A total of three incidence angles are investigated, −7.4°, 0°, 0°, 0°, and 7.6°, 0° relative to the design value.
The results indicate that even at the off-design incidences, tip injection can also act as an obstruction to the tip clearance flow and weaken the interaction between the passage flow and the tip clearance flow.
It is also found that tip injection causes the tip clearance loss to be less sensitive to the incidences.
Moreover, with injection, at all these incidences the heat transfer conditions are improved significantly on the blade tip surface in the middle and aft parts of blade.
Thus, tip injection is proved to be an effective method of controlling tip clearance flow, even at off-design conditions.
Beside that, an indirect empirical correlation is observed to be able to perform well in predicting the losses induced by tip clearance flow at design and off-design conditions, no matter whether air injection is active or not.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Niu, Maosheng& Zang, Shusheng. 2009. Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences. International Journal of Rotating Machinery،Vol. 2009, no. 2009, pp.1-12.
https://search.emarefa.net/detail/BIM-450653
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Niu, Maosheng& Zang, Shusheng. Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences. International Journal of Rotating Machinery No. 2009 (2009), pp.1-12.
https://search.emarefa.net/detail/BIM-450653
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Niu, Maosheng& Zang, Shusheng. Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences. International Journal of Rotating Machinery. 2009. Vol. 2009, no. 2009, pp.1-12.
https://search.emarefa.net/detail/BIM-450653
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-450653
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر