Validation of FeSiMg Alloy Production Model for the Experimental Process
المؤلفون المشاركون
Eissa, Mamdouh
El-Faramawy, Hoda
Ghali, Saeed
المصدر
العدد
المجلد 2012، العدد 2012 (31 ديسمبر/كانون الأول 2012)، ص ص. 1-6، 6ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2012-02-14
دولة النشر
مصر
عدد الصفحات
6
التخصصات الرئيسية
الملخص EN
This paper investigates the effect of limestone, bauxite, fluorspar, and quartzite additions on the magnesium recovery in FeSiMg production from dolomite.
Also, it illustrates the validation of the previous designed model.
According to the model, magnesium content in the product alloy is calculated by the equation [Mg]=(MgO0)[Si0][eKt[(MgO0)-[Si0]]-1]/((MgO0)[eKt[(MgO0)-[Si0]]]-[Si0]), where [Mg] is the concentration of magnesium metal in ferrosilicon magnesium alloy in mol/L, [Si0] and (MgO0) are the initial concentrations of silicon and magnesium oxide in charge in mol/L, t is the time in seconds, and K is the reaction rate constant (3.26588×10-7 LSec−1 mol−1).
The results of the production process are compared with the model results.
The deviation between the actual and predicted magnesium content decreases as fluorspar, limestone, and quartzite increase up to 12.8wt.%, 8wt.%, and 8wt.%, respectively, with increase in the amount of the additives, the magnesium content in the produced alloy becomes far from the predicted values.
It was found also that the addition of bauxite increases the gap between the actual and predicted values of magnesium content.
It was found that the deviation of the actual magnesium content from the predicted depends mainly on the viscosity of the slag.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ghali, Saeed& Eissa, Mamdouh& El-Faramawy, Hoda. 2012. Validation of FeSiMg Alloy Production Model for the Experimental Process. Journal of Metallurgy،Vol. 2012, no. 2012, pp.1-6.
https://search.emarefa.net/detail/BIM-452101
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ghali, Saeed…[et al.]. Validation of FeSiMg Alloy Production Model for the Experimental Process. Journal of Metallurgy No. 2012 (2012), pp.1-6.
https://search.emarefa.net/detail/BIM-452101
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ghali, Saeed& Eissa, Mamdouh& El-Faramawy, Hoda. Validation of FeSiMg Alloy Production Model for the Experimental Process. Journal of Metallurgy. 2012. Vol. 2012, no. 2012, pp.1-6.
https://search.emarefa.net/detail/BIM-452101
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-452101
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر