A Review of Additive Manufacturing

المؤلفون المشاركون

Wong, Kaufui V.
Hernandez, Aldo

المصدر

ISRN Mechanical Engineering

العدد

المجلد 2012، العدد 2012 (31 ديسمبر/كانون الأول 2012)، ص ص. 1-10، 10ص.

الناشر

Hindawi Publishing Corporation

تاريخ النشر

2012-08-16

دولة النشر

مصر

عدد الصفحات

10

التخصصات الرئيسية

هندسة ميكانيكية

الملخص EN

Additive manufacturing processes take the information from a computer-aided design (CAD) file that is later converted to a stereolithography (STL) file.

In this process, the drawing made in the CAD software is approximated by triangles and sliced containing the information of each layer that is going to be printed.

There is a discussion of the relevant additive manufacturing processes and their applications.

The aerospace industry employs them because of the possibility of manufacturing lighter structures to reduce weight.

Additive manufacturing is transforming the practice of medicine and making work easier for architects.

In 2004, the Society of Manufacturing Engineers did a classification of the various technologies and there are at least four additional significant technologies in 2012.

Studies are reviewed which were about the strength of products made in additive manufacturing processes.

However, there is still a lot of work and research to be accomplished before additive manufacturing technologies become standard in the manufacturing industry because not every commonly used manufacturing material can be handled.

The accuracy needs improvement to eliminate the necessity of a finishing process.

The continuous and increasing growth experienced since the early days and the successful results up to the present time allow for optimism that additive manufacturing has a significant place in the future of manufacturing.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

Wong, Kaufui V.& Hernandez, Aldo. 2012. A Review of Additive Manufacturing. ISRN Mechanical Engineering،Vol. 2012, no. 2012, pp.1-10.
https://search.emarefa.net/detail/BIM-454683

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

Wong, Kaufui V.& Hernandez, Aldo. A Review of Additive Manufacturing. ISRN Mechanical Engineering No. 2012 (2012), pp.1-10.
https://search.emarefa.net/detail/BIM-454683

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

Wong, Kaufui V.& Hernandez, Aldo. A Review of Additive Manufacturing. ISRN Mechanical Engineering. 2012. Vol. 2012, no. 2012, pp.1-10.
https://search.emarefa.net/detail/BIM-454683

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes bibliographical references

رقم السجل

BIM-454683