Dynamic Analysis and Control of the Clutch Filling Process in Clutch-to-Clutch Transmissions
المؤلفون المشاركون
Xu, Xiangyang
Guo, Wei
Liu, Yanfang
Zhang, Jing
المصدر
Mathematical Problems in Engineering
العدد
المجلد 2014، العدد 2014 (31 ديسمبر/كانون الأول 2014)، ص ص. 1-14، 14ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2014-06-23
دولة النشر
مصر
عدد الصفحات
14
التخصصات الرئيسية
الملخص EN
Clutch fill control in clutch-to-clutch transmissions influences shift quality considerably.
An oncoming clutch should be applied synchronously with the release of an offgoing clutch to shift gear smoothly; therefore, the gap between the piston and clutch plates should be eliminated when the torque capacity is near zero at the end of the clutch fill phase.
Open-loop control is typically implemented for the clutch fill because of the cost of pressure sensor.
Low control precision causes underfill or overfill to occur, deteriorating shift quality.
In this paper, a mathematical model of an electrohydraulic clutch shift control system is presented.
Special dynamic characteristic parameters for optimal clutch fill control are subsequently proposed.
An automatic method for predicting initial fill control parameters is proposed to eliminate distinct discrepancies among transmissions caused by manufacturing or assembling errors.
To prevent underfill and overfill, a fuzzy adaptive control method is proposed, in which clutch fill control parameters are adjusted self-adaptively and continually.
Road vehicle test results proved that applying the fuzzy adaptive method ensures the consistency of shift quality even after the transmission’s status is changed.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Guo, Wei& Liu, Yanfang& Zhang, Jing& Xu, Xiangyang. 2014. Dynamic Analysis and Control of the Clutch Filling Process in Clutch-to-Clutch Transmissions. Mathematical Problems in Engineering،Vol. 2014, no. 2014, pp.1-14.
https://search.emarefa.net/detail/BIM-461056
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Guo, Wei…[et al.]. Dynamic Analysis and Control of the Clutch Filling Process in Clutch-to-Clutch Transmissions. Mathematical Problems in Engineering No. 2014 (2014), pp.1-14.
https://search.emarefa.net/detail/BIM-461056
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Guo, Wei& Liu, Yanfang& Zhang, Jing& Xu, Xiangyang. Dynamic Analysis and Control of the Clutch Filling Process in Clutch-to-Clutch Transmissions. Mathematical Problems in Engineering. 2014. Vol. 2014, no. 2014, pp.1-14.
https://search.emarefa.net/detail/BIM-461056
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-461056
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر