![](/images/graphics-bg.png)
Experimental Determination of Cutting Power for Turning and Material Removal Rate for Drilling of AA 6061-T6 Using Vegetable Oils as Cutting Fluid
المؤلفون المشاركون
Jayaram, S. R.
Shashidhara, Y. M.
المصدر
العدد
المجلد 2013، العدد 2013 (31 ديسمبر/كانون الأول 2013)، ص ص. 1-7، 7ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2013-01-21
دولة النشر
مصر
عدد الصفحات
7
التخصصات الرئيسية
الملخص EN
The raw and modified versions of two nonedible vegetable oils, Pongam (Pogammia pinnata) and Jatropha (Jatropha curcas), and a commercially available branded mineral oil are used as straight cutting fluids for turning AA 6061 to assess cutting forces.
Minimum quantity lubrication is utilized for the supply of cutting fluids.
Cutting and thrust forces are measured.
Cutting power is determined for various cutting speeds, depths of cut, and feed rates.
Also, drilling is performed on the material to understand the material removal rate (MRR) under these oils.
The performances of vegetable oils are compared to mineral oil.
A noticeable reduction in cutting forces is observed under the Jatropha family of oils compared to mineral oil.
Further, better material removal rate is seen under both the vegetable oils and their versions compared to under petroleum oil for the range of thrust forces.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Shashidhara, Y. M.& Jayaram, S. R.. 2013. Experimental Determination of Cutting Power for Turning and Material Removal Rate for Drilling of AA 6061-T6 Using Vegetable Oils as Cutting Fluid. Advances in Tribology،Vol. 2013, no. 2013, pp.1-7.
https://search.emarefa.net/detail/BIM-466032
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Shashidhara, Y. M.& Jayaram, S. R.. Experimental Determination of Cutting Power for Turning and Material Removal Rate for Drilling of AA 6061-T6 Using Vegetable Oils as Cutting Fluid. Advances in Tribology No. 2013 (2013), pp.1-7.
https://search.emarefa.net/detail/BIM-466032
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Shashidhara, Y. M.& Jayaram, S. R.. Experimental Determination of Cutting Power for Turning and Material Removal Rate for Drilling of AA 6061-T6 Using Vegetable Oils as Cutting Fluid. Advances in Tribology. 2013. Vol. 2013, no. 2013, pp.1-7.
https://search.emarefa.net/detail/BIM-466032
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-466032
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)