Mechanical Behaviour and Springback Study of an Aluminium Alloy in Warm Forming Conditions

الملخص EN

This study deals with the mechanical behaviour and material modelling of an AA5754-O alloy at elevated temperature.

Experimental shear tests were performed from room temperature up to 200°C, and the material behaviour has been identified with both shear and tensile tests, as a function of temperature.

To analyse the influence of temperature during forming over springback, a split-ring test is used.

Experimental results are obtained and compared to numerical simulations performed with the finite element in-house code DD3IMP.

The numerical process of ring splitting is performed with the in-house code DD3TRIM.

The main observed data are force-displacement curves of the punch during forming, cup thickness at the end of forming, and ring gap after splitting.

It is shown that all these parameters are strongly dependent on the forming temperature.

A correlation is obtained between experimental data and numerical simulation for the evolution of punch force and opening after springback as a function of temperature.

The distribution of the tangential stress in the cup wall is the main factor influencing the springback mechanism in warm forming condition.