Dependence of Adhesion Properties on Blend Ratio of Ethylene-Propylene-Diene RubberStandard Malaysian Rubber Blend Adhesive
المؤلفون المشاركون
Lamaming, Junidah
Poh, B. T.
Tay, G. S.
المصدر
العدد
المجلد 2013، العدد 2013 (31 ديسمبر/كانون الأول 2013)، ص ص. 1-6، 6ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2013-12-17
دولة النشر
مصر
عدد الصفحات
6
التخصصات الرئيسية
العلوم الهندسية و تكنولوجيا المعلومات
الكيمياء
الملخص EN
Viscosity, tack and, peel and shear strengths of ethylene-propylene-diene rubber (EPDM)/standard Malaysian rubber (SMR L) blend adhesive were studied using various blend ratios of the two rubbers, ranging from 0 to 100% EPDM.
Coumarone-indene resin, toluene, and poly(ethylene terephthalate) (PET) were used as the tackifier, solvent, and coating substrate, respectively.
The tackifier content was fixed at 40 parts per hundred parts of rubber (phr).
A SHEEN hand coater was used to coat the adhesive on PET film at four coating thicknesses, that is, 30, 60, 90, and 120 µm.
The viscosity and adhesion properties were determined by a Brookfield viscometer and a Lloyd Adhesion Tester, respectively.
Results show that the viscosity, loop tacks and peel strength of blend adhesives decrease gradually with increasing % EPDM.
This observation is attributed to dilution effect and lowering in wettability and compatibility.
Shear strength, however, passes through a maximum at 20–40% EPDM blend ratio, an observation which is ascribed to culmination of cohesive strength at the optimum EPDM blend ratio.
Increasing coating thickness increases the adhesion properties in all blend ratios in this study.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Poh, B. T.& Lamaming, Junidah& Tay, G. S.. 2013. Dependence of Adhesion Properties on Blend Ratio of Ethylene-Propylene-Diene RubberStandard Malaysian Rubber Blend Adhesive. Journal of Coatings،Vol. 2013, no. 2013, pp.1-6.
https://search.emarefa.net/detail/BIM-467761
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Poh, B. T.…[et al.]. Dependence of Adhesion Properties on Blend Ratio of Ethylene-Propylene-Diene RubberStandard Malaysian Rubber Blend Adhesive. Journal of Coatings No. 2013 (2013), pp.1-6.
https://search.emarefa.net/detail/BIM-467761
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Poh, B. T.& Lamaming, Junidah& Tay, G. S.. Dependence of Adhesion Properties on Blend Ratio of Ethylene-Propylene-Diene RubberStandard Malaysian Rubber Blend Adhesive. Journal of Coatings. 2013. Vol. 2013, no. 2013, pp.1-6.
https://search.emarefa.net/detail/BIM-467761
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-467761
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر