Carbon Nanofiber Synthesis within 3-Dimensional Sintered Nickel Microfibrous Matrices : Optimization of Synthesis Conditions
المؤلفون المشاركون
Davis, Virginia A.
Tatarchuk, Bruce J.
Karwa, Amogh N.
المصدر
العدد
المجلد 2012، العدد 2012 (31 ديسمبر/كانون الأول 2012)، ص ص. 1-14، 14ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2012-06-28
دولة النشر
مصر
عدد الصفحات
14
التخصصات الرئيسية
العلوم الهندسية و تكنولوجيا المعلومات
الكيمياء
الملخص EN
This study focuses on the process of optimization for carbon nanofiber synthesis at the exterior and the interior of 3-dimensional sintered nickel microfibrous networks.
Synthesis of carbon nanofibers (CNF) by catalytic decomposition of acetylene (ethyne) was conducted at atmospheric pressure and short reaction times (10 min).
Two factors evaluated during the study were (a) CNF quality (observed by SEM and Raman spectroscopy) and (b) rate of reaction (gravimetrically measured carbon yield).
Independent optimization variables included redox faceting pretreatment of nickel, synthesis temperature, and gas composition.
Faceting resulted in an 8-fold increase in the carbon yield compared to an untreated substrate.
Synthesis with varying levels of hydrogen maximized the carbon yield (9.31 mg C/cm2 catalyst).
The quality of CNF was enhanced via a reduction in amorphous carbon that resulted from the addition of 20% ammonia.
Optimized growth conditions that led to high rates of CNF deposition preferentially deposited this carbon at the exterior layer of the nickel microfibrous networks (570°C, 78% H2, 20% NH3, 2% C2H2, faceted Ni.).
CNF growth within the 3-dimensional nickel networks was accomplished at the conditions selected to lower the gravimetric reaction rate (470°C, 10% H2, 88% N2, 2% C2H2, nonfaceted Ni).
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Karwa, Amogh N.& Davis, Virginia A.& Tatarchuk, Bruce J.. 2012. Carbon Nanofiber Synthesis within 3-Dimensional Sintered Nickel Microfibrous Matrices : Optimization of Synthesis Conditions. Journal of Nanotechnology،Vol. 2012, no. 2012, pp.1-14.
https://search.emarefa.net/detail/BIM-468829
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Karwa, Amogh N.…[et al.]. Carbon Nanofiber Synthesis within 3-Dimensional Sintered Nickel Microfibrous Matrices : Optimization of Synthesis Conditions. Journal of Nanotechnology No. 2012 (2012), pp.1-14.
https://search.emarefa.net/detail/BIM-468829
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Karwa, Amogh N.& Davis, Virginia A.& Tatarchuk, Bruce J.. Carbon Nanofiber Synthesis within 3-Dimensional Sintered Nickel Microfibrous Matrices : Optimization of Synthesis Conditions. Journal of Nanotechnology. 2012. Vol. 2012, no. 2012, pp.1-14.
https://search.emarefa.net/detail/BIM-468829
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-468829
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر