Heat Transfer and Failure Mode Analyses of Ultrahigh-Temperature Ceramic Thermal Protection System of Hypersonic Vehicles

الملخص EN

The transient temperature distribution of the ultrahigh-temperature ceramic (UHTC) thermal protection system (TPS) of hypersonic vehicles is calculated using finite volume method.

Convective cooling enables a balance of heat increment and loss to be achieved.

The temperature in the UHTC plate at the balance is approximately proportional to the surface heat flux and is approximately inversely proportional to the convective heat transfer coefficient.

The failure modes of the UHTCs are presented by investigating the thermal stress field of the UHTC TPS under different thermal environments.

The UHTCs which act as the thermal protection materials of hypersonic vehicles can fail because of the tensile stress at the lower surface, an area above the middle plane, and the upper surface as well as because of the compressive stress at the upper surface.

However, the area between the lower surface and the middle plane and a small area near the upper surface are relatively safe.

Neither the compressive stress nor the tensile stress will cause failure of these areas.