NylonGraphene Oxide Electrospun Composite Coating

الملخص EN

Graphite oxide is obtained by treating graphite with strong oxidizers.

The bulk material disperses in basic solutions yielding graphene oxide.

Starting from exfoliated graphite, different treatments were tested to obtain the best graphite oxide conditions, including calcination for two hours at 700°C and ultrasonic agitation in acidic, basic, or peroxide solutions.

Bulk particles floating in the solution were filtered, rinsed, and dried.

The graphene oxide obtained was characterized under SEM and FTIR techniques.

On the other hand, nylon 6-6 has excellent mechanical resistance due to the mutual attraction of its long chains.

To take advantage of the properties of both materials, they were combined as a hybrid material.

Electrochemical cells were prepared using porous silica as supporting electrode of the electrospun nylon/graphene oxide films for electrochemical testing.

Polarization curves were performed to determine the oxidation/reduction potentials under different acidic, alkaline, and peroxide solutions.

The oxidation condition was obtained in KOH and the reduction in H2SO4 solutions.

Potentiostatic oxidation and reduction curves were applied to further oxidize carbon species and then reduced them, forming the nylon 6-6/functionalized graphene oxide composite coating.

Electrochemical impedance measurements were performed to evaluate the coating electrochemical resistance and compared to the silica or nylon samples.