Influence of Partial Replacement of Nickel by Nitrogen on Microstructure and Mechanical Properties of Austenitic Stainless Steel
المؤلفون المشاركون
Ahmed, A.
El Badry, S. A.
Eissa, Mamdouh
Ghali, Saeed
المصدر
العدد
المجلد 2011، العدد 2011 (31 ديسمبر/كانون الأول 2011)، ص ص. 1-6، 6ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2011-11-16
دولة النشر
مصر
عدد الصفحات
6
التخصصات الرئيسية
الملخص EN
A new modified austenitic stainless steel has been developed through partial replacement of nickel by nitrogen.
Nitrogen stainless steel was produced in 10 kg induction furnace under nitrogen pressure, while reference one, AISI 316 steel grade, was produced in open-induction furnace.
Both were cast and hot forged, and the total nitrogen was determined.
Furthermore, the produced forged steels were subjected to solution treatment at different temperatures.
The microstructure of produced stainless steels was observed.
The X-ray diffractmeter and Mossbauer effect spectroscopy were used to follow the phase change in reference and modified steels after different heat treatment temperatures.
The influence of grain-size, soluble, and insoluble nitrogen on tensile strength and hardness was investigated.
The major phase in the modified steel has a fcc structure similar to the reference one, but with finer grains and more expanded lattice.
The yield strength and hardness of the nitrogen-modified stainless steel are higher than the reference steel.
On the other hand, the increase of nitrogen content deteriorates the steel ductility.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ahmed, A.& Ghali, Saeed& Eissa, Mamdouh& El Badry, S. A.. 2011. Influence of Partial Replacement of Nickel by Nitrogen on Microstructure and Mechanical Properties of Austenitic Stainless Steel. Journal of Metallurgy،Vol. 2011, no. 2011, pp.1-6.
https://search.emarefa.net/detail/BIM-487317
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ahmed, A.…[et al.]. Influence of Partial Replacement of Nickel by Nitrogen on Microstructure and Mechanical Properties of Austenitic Stainless Steel. Journal of Metallurgy No. 2011 (2011), pp.1-6.
https://search.emarefa.net/detail/BIM-487317
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ahmed, A.& Ghali, Saeed& Eissa, Mamdouh& El Badry, S. A.. Influence of Partial Replacement of Nickel by Nitrogen on Microstructure and Mechanical Properties of Austenitic Stainless Steel. Journal of Metallurgy. 2011. Vol. 2011, no. 2011, pp.1-6.
https://search.emarefa.net/detail/BIM-487317
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-487317
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر