Fibre Laser Cutting and Chemical Etching of AZ31 for Manufacturing Biodegradable Stents
المؤلفون المشاركون
Biffi, Carlo Alberto
Previtali, Barbara
Demir, Ali Gökhan
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2013، العدد 2013 (31 ديسمبر/كانون الأول 2013)، ص ص. 1-11، 11ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2013-09-08
دولة النشر
مصر
عدد الصفحات
11
التخصصات الرئيسية
العلوم الهندسية و تكنولوجيا المعلومات
الملخص EN
The use of magnesium-alloy stents shows promise as a less intrusive solution for the treatment of cardiovascular pathologies as a result of the high biocompatibility of the material and its intrinsic dissolution in body fluids.
However, in addition to requiring innovative solutions in material choice and design, these stents also require a greater understanding of the manufacturing process to achieve the desired quality with improved productivity.
The present study demonstrates the manufacturing steps for the realisation of biodegradable stents in AZ31 magnesium alloy.
These steps include laser microcutting with a Q-switched fibre laser for the generation of the stent mesh and subsequent chemical etching for the cleaning of kerf and surface finish.
Specifically, for the laser microcutting step, inert and reactive gas cutting conditions were compared.
The effect of chemical etching on the reduction in material thickness, as well as on spatter removal, was also evaluated.
Prototype stents were produced, and the material composition and surface quality were characterised.
The potentialities of combining nanosecond laser microcutting and chemical etching are shown and discussed.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Demir, Ali Gökhan& Previtali, Barbara& Biffi, Carlo Alberto. 2013. Fibre Laser Cutting and Chemical Etching of AZ31 for Manufacturing Biodegradable Stents. Advances in Materials Science and Engineering،Vol. 2013, no. 2013, pp.1-11.
https://search.emarefa.net/detail/BIM-491026
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Demir, Ali Gökhan…[et al.]. Fibre Laser Cutting and Chemical Etching of AZ31 for Manufacturing Biodegradable Stents. Advances in Materials Science and Engineering No. 2013 (2013), pp.1-11.
https://search.emarefa.net/detail/BIM-491026
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Demir, Ali Gökhan& Previtali, Barbara& Biffi, Carlo Alberto. Fibre Laser Cutting and Chemical Etching of AZ31 for Manufacturing Biodegradable Stents. Advances in Materials Science and Engineering. 2013. Vol. 2013, no. 2013, pp.1-11.
https://search.emarefa.net/detail/BIM-491026
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-491026
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر